Electronics

The all-new ELEMNT BOLT combines a race-ready design with a larger, high-contrast 2.3” display for crisp readability at any speed and in any conditions. Powered by the ELEMNT experience, its intuitive ride intelligence, smart navigation, and seamless connectivity make every interaction effortless—whether you're racing, training, or chasing your next PR.

Powerful, robust and adventure ready, the all-new ELEMNT ROAM combines a large, anti-glare display with touchscreen convenience and dynamic ride intelligence to make every ride effortless. With crisp, easy-to-read mapping, intuitive navigation, and smart features that handle the details before, during, and after your ride, the ELEMNT ROAM keeps you focused on the road ahead. Whether you're exploring new routes or pushing through an endurance challenge, the ELEMNT ROAM is always ready for your next big ride.

The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes

All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes

TICKR FIT heart rate armband uses optical heart rate technology to provide accurate heart rate and calorie burn data in the most comfortable form factor yet! Equipped with Bluetooth and ANT+ technology to seamlessly pair with fitness apps, smartphones, and GPS bike computers and watches. Worn on the forearm, the TICKR FIT heart rate monitor comes with an adjustable band that is designed for your most grueling workouts including running, cycling, fitness classes, and more. TICKR FIT has water-resistant technology and a rechargeable battery that lasts up to 30 hours. - Dual band technology - Real time heart rate and calorie tracking - Advanced performance material - USB rechargeable battery - LED indicator lights - Two adjustable bands included - Third party app compatibility - Apple watch and apple TV integration

Accurate Heart Rate Data TRACKR HEART RATE tracks beats per minute (BPM) in-activity as well as Average Heart Rate, Max Heart Rate and Total Calories in the activity summary in the Wahoo App. It provides heart rate variability (HRV) with a compatible app. TRACKR HRM Data Intuitive LED Guidance TRACKR HEART RATE features an LED indicator for effortless monitoring - ensure battery status and check that TRACKR HEART RATE is paired to devices and apps. TRACKR's LED indicator Connected Training Sync to the most popular training apps and accessories, including Apple Watch, Strava, Peloton, adidas Running, Nike Run Club and the Wahoo ecosystem of apps and training products. TRACKR's connectivity features Protected from the Elements TRACKR HEART RATE is your perfect companion for rainy rides or a sweaty run. Rated IPX7, you can push your limits without worrying about the elements.

The Wahoo TRACKR SPEED sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy.

Know what's coming. Ride with extra confidence with Trek CarBack Radar Rear Light. CarBack's radar helps detect rear-approaching vehicles from up to 240m and provides audio and visual alerts through paired GPS head units for increased on-bike awareness. Built with integrated best-in-class Daytime Running Lights that are visible from up to 2km away, CarBack is a must-have for every cyclist riding on shared roads. - CarBack can detect and alert riders of rear-approaching vehicles from up to 240m away - Compatible with most cycling GPS computers - Pair CarBack with the Trek Accessory app to see a vehicle's rear-approaching and passing distance on your smartphone - Designed with focus, flash, and range to be Daytime-visible from up to 2km away - Four light flash modes: Day Flash 90LM, Day Steady 25LM, Night Steady 5LM, and Night Flash 5 LM - Visible fuel gauge LEDs make it easy to see CarBack's 7+ hour battery status - IPX7 waterproof rating to confidently ride through wet conditions - Includes Quick Connect Plus rear mount and USB-C charging cable

For optimal functionality. - Not Bosch Smart System compatible - Designed for Rail Gen 2 frames - Refer to Service Manual for assembly instructions and service

This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm

Shimano Di2 Frame Junction Box - Frame Junction Box connects via SD50 E-tube wires to four different points: front derailleur, rear derailleur, cockpit junction box and battery mount - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware from http://e-tubeproject.shimano.com/

Shimano Di2 Frame Junction Box Frame Junction Box connects via SD50 E-tube wires to four different points: front derailleur, rear derailleur, cockpit junction box and battery mount All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions Use Di2 system checker to update component firmware from http://e-tubeproject.shimano.com/

SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

With this universal bike mount, you can mount your cell phone on a city bike, racing bike, trekking bike or mountain bike. Interchangeable heads for SPC/SPC+ - Flexible mobile phone attachment to the bike - Tool-free attachment to bicycle handlebars or stem - Mobile phone can be fixed in portrait or landscape format - Arm for angle adjustment - Dimensions: 32 x 30 x 69mm - Clamp Diameter: 22-42mm

The Crystal Case provides your iPhone with all the protection you expect out of a Rokform case while maintaining a slim, lightweight design. In addition to effortlessly slipping into and out of your pocket, your Crystal Case will grip any magnetic surface. Discover new ways to use your iPhone with Rokform's magnetic technology. - MILITARY-GRADE PROTECTION: Absorbs shocks and drops thanks to reinforced corners and enhanced screen and camera protection, up to 4x more than other cases. Exceeds Military Grade Drop Test standards, MIL-STD 801G-516.6. - MAGNETIC CASE: Built-in industrial-grade magnets keeps your phone hands free and locked to any magnetic surface. - MagSafe® COMPATIBLE: Compatible with all Apple® MagSafe® accessories, including wireless charging. - TWIST LOCK: Built-in RokLock® Twist lock system enables you to use all our twist lock bike mounts, motorcycle mounts, and car mounts. - SLIM & LIGHTWEIGHT: Fits your phone perfectly while providing 6-sided 360-degree protection. - 2-YEAR ROKFORM WARRANTY: 2-year limited warranty and 5-star customer service based in Irvine, California.

With a Rugged Case on your iPhone, you will rest easy knowing your phone will withstand any slips or drops up to 6 feet. With Rokform's magnetic technology built in, you'll discover new ways to use your phone. - MILITARY-GRADE PROTECTION: Absorbs shocks and drops thanks to reinforced corners and enhanced screen and camera protection, up to 4x more than other cases. Exceeds Military Grade Drop Test standards, MIL-STD 801G-516.6. - MAGNETIC CASE: Built-in industrial-grade magnets keeps your phone hands free and locked to any magnetic surface. - TWIST LOCK: Built-in RokLock® Twist lock system enables you to use all our twist lock bike mounts, motorcycle mounts, and car mounts. - SLIM & LIGHTWEIGHT: Fits your phone perfectly while providing 6-sided 360-degree protection. - 2-YEAR ROKFORM WARRANTY: 2-year limited warranty and 5-star customer service based in Irvine, California.

Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.

Profile Design's UCM XL Universal Computer Mount provides a convenient 60mm-long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.

The Vibe Aero Race Mount is designed for the PRO Vibe Aero handlebar/stem combination. Made of high-quality CNC machined 6061-T6 Aluminum, it fits all Pro handlebar/stem combinations. - Compatibility (Regular): GARMIN 820, 520, 25, 20 - Compatibility (XL): GARMIN 1030, 1000, 820, 520, 25, 20 - Lifetime Guarantee - Weight: 30g

The C1 chainring is a full featured, crank-based power meter that features dual-sided measurement. The FSA-made, one-piece chainring design provides added stiffness for shifting no matter the terrain. Available in 53/39, 52/36 and 50/36 chainring tooth options for 5 bolt, 110 BCD cranks, the C1 mounts to existing hardware on the bike. Additionally, dual band ANT+ and Bluetooth SMART connectivity make the C1 an obvious choice for riders looking for more features and better value.

9-function wireless bike computer The Protegé 9.0 wireless bike computer is great for training, touring and keeping track of your car-free miles. It has become a favorite among all types of cyclists for its simple design and rugged construction. Buttonless technology and a 4-line display give you 5 pieces of data (including temperature!) at a glance. - Functions: Current Speed - Speed Comparator - Ride Time - Trip Distance - Dual Odometer (for 2 wheel sizes) - Average Speed - Maximum Speed - Clock - Temperature - Digital technology results in decreased interference - Easy-to-adjust sensor that fits bladed spokes up to 4 mm - 4-Line MacroMonitor LCD displays up to 5 pieces of data at a glance - Fits 25.0-31.8mm handlebars - 21" wireless range

THE NEW ITALON ULTRA IS A FORGED ALUMINUM MOUNT FOR THE NEW TALON ULTRA HANDLEBAR. It is compatible with Garmin, Wahoo and Polar devices. In the underbelly, you can install a MOST headlight, or a camera for spectacular "on board" shooting.

Aerodynamic and rigidity combined together to guarantee the best performance.

- Machined protective case that houses the Apple AirTag under your saddle. Apple AirTag sold separately - Casing is not waterproof but the Apple AirTag is rated IP67 (water resistant) - Compatible with some saddle bags - Mounts to saddle rails

The Smart Vise Mount is an extra-secure, highly versatile smart phone mount that straps to nearly all styles of bicycle handlebars. Its main frame is constructed from durable machine aluminum and its industrial design works great and looks great. The mount is lined with a soft, no-slip material and it’s compatible with nearly all styles of modern smart phones. It features a unique dual-rod design that slides open or closed via a twist knob for secure and precise phone mounting. Excellent for hardcore commuters and all other cyclists, the Smart Vise Mount is a terrific device for on-bike smart phone accessibility. - Secure vise grip to hold phones tight - Soft padded to protect phone and reduce vibration - Replaceable rubber strap - Fits most phones with or without a case -125g

Convert your K-Edge Garmin Computer Mount to be a Computer + Action Camera combination mount. Works with any camera that utilizes the GoPro sytle interface, including GoPro Hero, Garmin VIRB, and Shimano CM-1000. - Camera Adapter mount with GoPro style interface - Fits K-EDGE Garmin Mounts (K13-500, K13-505, K13-560) - Locks GoPro, Shimano, VIRB style cameras underneath Garmin Computer. - Centers camera in out of site position - Improves video clarity by removing plastic mount shake - Colors: Anodized Black - Weight: 14grams *Note: Garmin VIRB requires the GoPro adapter that is included in the box with the VIRB.

K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatible: Garmin EDGE 820, 520, 510, 500, 25 and 20. - Replaceable Garmin Insert with K-EDGE “Definitive Click” locking system - Fits 31.8MM Handlebars - NOT combo compatible - Weight: 48g - Anodized Color- Black

K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility: Wahoo Bolt - Fits Handlebars: 31.8MM - NOT GoPro Interface Compatible - Anodized Color: Black Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Sigma instructions that recommend use of the provided tether leash.

Monitor your speed and cadence as you ride with these easy-to-install wireless sensors. With no magnets or other exposed parts to line up, these sensors are easy to install, maintain and move between bikes. The speed sensor 2 attaches to the hub of either wheel and self-calibrates with your Edge® cycling computer or compatible Garmin device to give you accurate speed and distance at all times — even without a head unit. - The cadence sensor 2 fastens to any size crank arm and measures pedal strokes per minute so you can get the most out of your training. - Send live speed, distance and cadence data to compatible training apps or displays by using ANT+® connectivity and BLUETOOTH® Low Energy technology. - With both of these sensors on your bike, you can work to improve your personal best or see where you stand against the pros.