Electronics

The all-new ELEMNT BOLT combines a race-ready design with a larger, high-contrast 2.3” display for crisp readability at any speed and in any conditions. Powered by the ELEMNT experience, its intuitive ride intelligence, smart navigation, and seamless connectivity make every interaction effortless—whether you're racing, training, or chasing your next PR.

Powerful, robust and adventure ready, the all-new ELEMNT ROAM combines a large, anti-glare display with touchscreen convenience and dynamic ride intelligence to make every ride effortless. With crisp, easy-to-read mapping, intuitive navigation, and smart features that handle the details before, during, and after your ride, the ELEMNT ROAM keeps you focused on the road ahead. Whether you're exploring new routes or pushing through an endurance challenge, the ELEMNT ROAM is always ready for your next big ride.

The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes

All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes

TICKR FIT heart rate armband uses optical heart rate technology to provide accurate heart rate and calorie burn data in the most comfortable form factor yet! Equipped with Bluetooth and ANT+ technology to seamlessly pair with fitness apps, smartphones, and GPS bike computers and watches. Worn on the forearm, the TICKR FIT heart rate monitor comes with an adjustable band that is designed for your most grueling workouts including running, cycling, fitness classes, and more. TICKR FIT has water-resistant technology and a rechargeable battery that lasts up to 30 hours. - Dual band technology - Real time heart rate and calorie tracking - Advanced performance material - USB rechargeable battery - LED indicator lights - Two adjustable bands included - Third party app compatibility - Apple watch and apple TV integration

Accurate Heart Rate Data TRACKR HEART RATE tracks beats per minute (BPM) in-activity as well as Average Heart Rate, Max Heart Rate and Total Calories in the activity summary in the Wahoo App. It provides heart rate variability (HRV) with a compatible app. TRACKR HRM Data Intuitive LED Guidance TRACKR HEART RATE features an LED indicator for effortless monitoring - ensure battery status and check that TRACKR HEART RATE is paired to devices and apps. TRACKR's LED indicator Connected Training Sync to the most popular training apps and accessories, including Apple Watch, Strava, Peloton, adidas Running, Nike Run Club and the Wahoo ecosystem of apps and training products. TRACKR's connectivity features Protected from the Elements TRACKR HEART RATE is your perfect companion for rainy rides or a sweaty run. Rated IPX7, you can push your limits without worrying about the elements.

The Wahoo TRACKR SPEED sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy.

Know what's coming. Ride with extra confidence with Trek CarBack Radar Rear Light. CarBack's radar helps detect rear-approaching vehicles from up to 240m and provides audio and visual alerts through paired GPS head units for increased on-bike awareness. Built with integrated best-in-class Daytime Running Lights that are visible from up to 2km away, CarBack is a must-have for every cyclist riding on shared roads. - CarBack can detect and alert riders of rear-approaching vehicles from up to 240m away - Compatible with most cycling GPS computers - Pair CarBack with the Trek Accessory app to see a vehicle's rear-approaching and passing distance on your smartphone - Designed with focus, flash, and range to be Daytime-visible from up to 2km away - Four light flash modes: Day Flash 90LM, Day Steady 25LM, Night Steady 5LM, and Night Flash 5 LM - Visible fuel gauge LEDs make it easy to see CarBack's 7+ hour battery status - IPX7 waterproof rating to confidently ride through wet conditions - Includes Quick Connect Plus rear mount and USB-C charging cable

For optimal functionality. - Not Bosch Smart System compatible - Designed for Rail Gen 2 frames - Refer to Service Manual for assembly instructions and service

This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm

Shimano Di2 Frame Junction Box - Frame Junction Box connects via SD50 E-tube wires to four different points: front derailleur, rear derailleur, cockpit junction box and battery mount - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware from http://e-tubeproject.shimano.com/

Shimano Di2 Frame Junction Box Frame Junction Box connects via SD50 E-tube wires to four different points: front derailleur, rear derailleur, cockpit junction box and battery mount All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions Use Di2 system checker to update component firmware from http://e-tubeproject.shimano.com/

SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

With this universal bike mount, you can mount your cell phone on a city bike, racing bike, trekking bike or mountain bike. Interchangeable heads for SPC/SPC+ - Flexible mobile phone attachment to the bike - Tool-free attachment to bicycle handlebars or stem - Mobile phone can be fixed in portrait or landscape format - Arm for angle adjustment - Dimensions: 32 x 30 x 69mm - Clamp Diameter: 22-42mm

The Crystal Case provides your iPhone with all the protection you expect out of a Rokform case while maintaining a slim, lightweight design. In addition to effortlessly slipping into and out of your pocket, your Crystal Case will grip any magnetic surface. Discover new ways to use your iPhone with Rokform's magnetic technology. - MILITARY-GRADE PROTECTION: Absorbs shocks and drops thanks to reinforced corners and enhanced screen and camera protection, up to 4x more than other cases. Exceeds Military Grade Drop Test standards, MIL-STD 801G-516.6. - MAGNETIC CASE: Built-in industrial-grade magnets keeps your phone hands free and locked to any magnetic surface. - MagSafe® COMPATIBLE: Compatible with all Apple® MagSafe® accessories, including wireless charging. - TWIST LOCK: Built-in RokLock® Twist lock system enables you to use all our twist lock bike mounts, motorcycle mounts, and car mounts. - SLIM & LIGHTWEIGHT: Fits your phone perfectly while providing 6-sided 360-degree protection. - 2-YEAR ROKFORM WARRANTY: 2-year limited warranty and 5-star customer service based in Irvine, California.

With a Rugged Case on your iPhone, you will rest easy knowing your phone will withstand any slips or drops up to 6 feet. With Rokform's magnetic technology built in, you'll discover new ways to use your phone. - MILITARY-GRADE PROTECTION: Absorbs shocks and drops thanks to reinforced corners and enhanced screen and camera protection, up to 4x more than other cases. Exceeds Military Grade Drop Test standards, MIL-STD 801G-516.6. - MAGNETIC CASE: Built-in industrial-grade magnets keeps your phone hands free and locked to any magnetic surface. - TWIST LOCK: Built-in RokLock® Twist lock system enables you to use all our twist lock bike mounts, motorcycle mounts, and car mounts. - SLIM & LIGHTWEIGHT: Fits your phone perfectly while providing 6-sided 360-degree protection. - 2-YEAR ROKFORM WARRANTY: 2-year limited warranty and 5-star customer service based in Irvine, California.

Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.

Profile Design's UCM XL Universal Computer Mount provides a convenient 60mm-long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.

The Vibe Aero Race Mount is designed for the PRO Vibe Aero handlebar/stem combination. Made of high-quality CNC machined 6061-T6 Aluminum, it fits all Pro handlebar/stem combinations. - Compatibility (Regular): GARMIN 820, 520, 25, 20 - Compatibility (XL): GARMIN 1030, 1000, 820, 520, 25, 20 - Lifetime Guarantee - Weight: 30g

The C1 chainring is a full featured, crank-based power meter that features dual-sided measurement. The FSA-made, one-piece chainring design provides added stiffness for shifting no matter the terrain. Available in 53/39, 52/36 and 50/36 chainring tooth options for 5 bolt, 110 BCD cranks, the C1 mounts to existing hardware on the bike. Additionally, dual band ANT+ and Bluetooth SMART connectivity make the C1 an obvious choice for riders looking for more features and better value.

9-function wireless bike computer The Protegé 9.0 wireless bike computer is great for training, touring and keeping track of your car-free miles. It has become a favorite among all types of cyclists for its simple design and rugged construction. Buttonless technology and a 4-line display give you 5 pieces of data (including temperature!) at a glance. - Functions: Current Speed - Speed Comparator - Ride Time - Trip Distance - Dual Odometer (for 2 wheel sizes) - Average Speed - Maximum Speed - Clock - Temperature - Digital technology results in decreased interference - Easy-to-adjust sensor that fits bladed spokes up to 4 mm - 4-Line MacroMonitor LCD displays up to 5 pieces of data at a glance - Fits 25.0-31.8mm handlebars - 21" wireless range

THE NEW ITALON ULTRA IS A FORGED ALUMINUM MOUNT FOR THE NEW TALON ULTRA HANDLEBAR. It is compatible with Garmin, Wahoo and Polar devices. In the underbelly, you can install a MOST headlight, or a camera for spectacular "on board" shooting.

Aerodynamic and rigidity combined together to guarantee the best performance.

- Machined protective case that houses the Apple AirTag under your saddle. Apple AirTag sold separately - Casing is not waterproof but the Apple AirTag is rated IP67 (water resistant) - Compatible with some saddle bags - Mounts to saddle rails

The Smart Vise Mount is an extra-secure, highly versatile smart phone mount that straps to nearly all styles of bicycle handlebars. Its main frame is constructed from durable machine aluminum and its industrial design works great and looks great. The mount is lined with a soft, no-slip material and it’s compatible with nearly all styles of modern smart phones. It features a unique dual-rod design that slides open or closed via a twist knob for secure and precise phone mounting. Excellent for hardcore commuters and all other cyclists, the Smart Vise Mount is a terrific device for on-bike smart phone accessibility. - Secure vise grip to hold phones tight - Soft padded to protect phone and reduce vibration - Replaceable rubber strap - Fits most phones with or without a case -125g

Convert your K-Edge Garmin Computer Mount to be a Computer + Action Camera combination mount. Works with any camera that utilizes the GoPro sytle interface, including GoPro Hero, Garmin VIRB, and Shimano CM-1000. - Camera Adapter mount with GoPro style interface - Fits K-EDGE Garmin Mounts (K13-500, K13-505, K13-560) - Locks GoPro, Shimano, VIRB style cameras underneath Garmin Computer. - Centers camera in out of site position - Improves video clarity by removing plastic mount shake - Colors: Anodized Black - Weight: 14grams *Note: Garmin VIRB requires the GoPro adapter that is included in the box with the VIRB.

K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatible: Garmin EDGE 820, 520, 510, 500, 25 and 20. - Replaceable Garmin Insert with K-EDGE “Definitive Click” locking system - Fits 31.8MM Handlebars - NOT combo compatible - Weight: 48g - Anodized Color- Black

K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility: Wahoo Bolt - Fits Handlebars: 31.8MM - NOT GoPro Interface Compatible - Anodized Color: Black Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Sigma instructions that recommend use of the provided tether leash.

Monitor your speed and cadence as you ride with these easy-to-install wireless sensors. With no magnets or other exposed parts to line up, these sensors are easy to install, maintain and move between bikes. The speed sensor 2 attaches to the hub of either wheel and self-calibrates with your Edge® cycling computer or compatible Garmin device to give you accurate speed and distance at all times — even without a head unit. - The cadence sensor 2 fastens to any size crank arm and measures pedal strokes per minute so you can get the most out of your training. - Send live speed, distance and cadence data to compatible training apps or displays by using ANT+® connectivity and BLUETOOTH® Low Energy technology. - With both of these sensors on your bike, you can work to improve your personal best or see where you stand against the pros.

Monitor your pedaling cadence as you ride with this easy-to-install wireless sensor. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes. Simply attach the sensor and ride. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes.

Performance GPS Cycling Computer with Mapping - Dynamic performance monitoring provides insights on your VO2 max, recovery, training load focus, heat and altitude acclimation, nutrition, hydration and more - Cycling safety features include new bike alarm, group messaging and tracking, incident detection and compatibility with Varia rearview radar and lights so you can see and be seen - Includes routable Garmin Cycle Map with popularity routing — which helps you ride like a local — plus off-course recalculation and back to start; mountain biking model has integrated Trailforks data, including trail difficulty ratings - Customize with free apps, widgets and data fields from the Connect iQ Store - MTB dynamics track jump count, jump distance and hang time as well as Grit, a measure of the ride’s difficulty, and Flow, which tracks the smoothness of your descent so you have a score to beat next time - Battery life: up to 20 hours with GPS; extendable up to 40 hours with the optional Garmin Charge power pack or in battery save mode Who cares that the Edge 530 cycling computer offers dynamic performance monitoring and insights to help you improve? You do. So, whether you’re a podium finisher, Kona qualifier, gravel grinder, straight-shaven, urban pedaler, dirt ball or somewhere in between, Edge 530 is ready to roll as your new riding partner. In The Box Device Only - Edge 530 - Standard mount - Flush out-front mount - Tether - USB cable - Documentation Sensor Bundle - Edge 530 - Standard mount - Flush out-front mount - Speed sensor - Cadence sensor - Heart rate monitor - Tether - USB cable - Documentation

Edge 550 is a compact GPS cycling computer with a vivid color display and button controls, designed to deliver performance insights, navigation, and safety alerts. It supports advanced training features when paired with compatible sensors and keeps you connected with GroupRide. - Vivid color screen displays maps and stats in detail - Battery lasts up to 12 hours or 36 in saver mode - Road hazard alerts shared by fellow cyclists - Preloaded maps and trailforks for local riding

Small in size. Big on performance. Edge 850 is a compact GPS cycling computer with a vivid color touchscreen and button controls, designed to deliver performance insights, navigation, and safety alerts. It supports advanced training features when paired with compatible sensors and keeps you connected with GroupRide. - Vivid color screen shows maps and stats in detail - Battery lasts up to 12 hours or 36 hours in saver mode - Road hazard alerts shared by fellow cyclists - Built-in bike bell alerts riders and pedestrians

- Edge Flush Out-Front Mount - Power Mount Compatible

THE BIKE COMPUTER MADE FOR MOUNTAIN BIKERS Edge MTB is made tough with a rugged, compact design that’s ready for long days on the trails. And new enduro and downhill ride profiles with 5 Hz GPS recording during descents mean you can see greater detail about the lines you take. - Rugged Design With Scratch-Resistant Corning® Gorilla® Glass - Up To 14 Hours Of Battery Life In Demanding Use Cases - Enduro And Downhill Ride Profiles - 5 Hz GPS Recording While Descending In Enduro Or Downhill Ride Profiles - Preloaded With Trailforks Maps And Forksight Mode - Automatically Track Split Times While Riding BUILT TO SHRED Featuring a compact, rugged 7-button design with scratch-resistant Corning Gorilla Glass, the Edge MTB bike computer can stand up to the most extreme rides. ENDURO AND DOWNHILL RIDE PROFILES The enduro ride profile tracks total ascent and descent from each run and for the ride overall. The downhill profile laps each time you finish a descent, so your return to the top via shuttle or ski lift doesn’t affect your ride stats. 5 HZ GPS RECORDING See greater detail about the lines you take down the trail with multi-band GPS with 5 Hz GPS recording while using the enduro or downhill ride profiles. UNLOCK NEW TRAIL DATA With preloaded Trailforks maps, you can dig into trail details before you ride. And get guidance along the way with Forksight mode to see the names of trails up ahead, distance, elevation, and more. SET TIMING GATES Set timing gates throughout a course to track split times and better understand your ride or race performance in real time. RIP ALL DAY LONG Edge MTB is built with long riding days in mind, with up to 14 hours of battery life in demanding use cases or up to 26 hours in battery saver mode.

Stay ahead of the pack with Garmin's Out-front Bike Mount that lets you to take full advantage of your Edge's capabilities without compromising your ride. The mount positions your device for easier monitoring and safety. Also compatible with the Forerunner 910XT and 310XT when used with a quick-release kit (sold separately).

Rally RS200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally RS200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite Shimano SPD-SL cleats in mind. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 320g - Water resistance: IPX7 - Cleat type: SPD-SL - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RS200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

Get precision power for all your rides. The Rally™ RK210 power meter pedals for road (compatible with LOOK KEO cleats) provide accurate power data and allow you to easily swap to Rally™ XC210 off-road pedal bodies. RK210 models are dual-sensing for additional metrics, including left/right balance and more.

Get precision power for all your rides. The Rally™ RS210 power meter pedals for road (compatible with SHIMANO SPD-SL cleats) provide accurate power data and allow you to easily swap to Rally™ XC210 off-road pedal bodies. RS210 models are dual-sensing for additional metrics, including left/right balance and more. The redesigned pedals are made of carbon for reduced weight and enhanced durability. They’re also rechargeable with up to 90 hours of ride time. Put your pedals in travel mode during transport to conserve battery life. These power meters are highly responsive and +/- 1% accurate. To maximize accuracy, the Pedal IQ™ smart calibration feature alerts you when you need to calibrate based on several factors.

- Replacement bike mounts and other accessories for your Garmin products

It’s got your back while you ride ahead. Varia™ eRTL615 rearview radar for eBikes is our first battery-free radar. It plugs directly into your compatible eBike. It detects cars approaching from behind and provides audible and visible alerts when paired with your compatible Garmin smartwatch, bike computer or even your smartphone with the Varia™ app. This radar also has a bright tail light to make you more visible to motorists, adding peace of mind to every ride. And since you don’t have to charge it between rides, that’s one less thing to worry about.

Made in the USA by the bike computer mount experts K-Edge, this Wahoo, Garmin, and GoPro compatible computer mount is made specifically for the ENVE Carbon Road Stem. The ENVE Combo Computer Mount integrates seamlessly with your ENVE Road Stem and opens up the possibility to accessorize your ride with a computer, light, and/or camera combo. This mount is made in the USA by the experts at K-Edge, and is compatible with all available K-Edge accessory mount inserts. FEATURES - Manufactured in the USA by K-Edge - Multiple Computer Mount Options - Multiple Light and Camera Options COMPATIBILITY - Wahoo - Garmin Models: 1030, 1000, 820, 520, 510, 500, 25, 20

What It Is A computer mount, with inserts for Garmin or WAHOO cycling computers, for exclusive use with ENVE Aero road stems. This mount also includes the combo upgrade to add a GoPro camera. Compatible with the following Garmin Models: 1030, 1000, 820, 520, 510, 500, 25, 20. Who It's For Cyclists using the ENVE Aero Road Stem and a Garmin or WAHOO cycling GPS computer. Why We Made It We wanted to create a clean and integrated solution to mounting a Garmin or WAHOO GPS cycling computer without having to clamp it to our handlebars. In the case of the ENVE Aero Road and TT bar it is impossible to clamp anything to the handlebar itself. The ENVE Computer Mount, mounted to the ENVE Aero Road Stem, is ready to mount both Garmin and WAHOO right out of the box.

Instant bike dashboard Enhance your riding experience while delta keeps your mobile phone safe. Whether cycling is a new hobby or you're an avid competitor, riding a mountain bike or a classic two-wheeler, this phone holder will provide full-screen visibility and hands-free access to ensure maximum safety for you AND your smartphone, while on the road! Features Mobile Phone Compatibility - Bicycle mobile phone mount compatible with phones up to 2.9 inch wide, .625 inch depth, 6 inch length (up to iPhone X and Samsung Galaxy 9 non plus + versions). Secure Mobile Phone Mounting - Weatherproof bungee and rubber inserts keep phone secure while delta’s patented cam lock provides added security for your mobile phone on rough terrain. Easily Accessible - Sliding system allows for easy in/out while on the go, stop for an important call, adjust navigation, and never worry about missing the perfect photo opportunity while riding. Multiple Mounting Options - Included handlebar and stem cap mounts allow you to position your mobile phone in your desired location. Securely mounts to handlebar diameters up to 1 3/8" / 35 mm. Quality Construction - Designed for road cycling, your mobile phone is fully enclosed and securely mounted in place with a built-in locking mechanism. Precision-engineered design grips your device, providing ease-of-mind on the roughest terrain. Weight - 0.14 lbs / 65 grams

Instant bike dashboard Perfect for any enthusiast, Delta's bicycle phone mount allows you to securely display your mobile device while riding. Using a built-in lock mechanism, your plus-sized smartphone is secured safely with multiple grip points and bumpers, to prevent shock and reduce vibration on rough terrain. Adjust the angle of display for convenient viewing while riding to easily access navigation, answer that important call or stop for the perfect photo opportunity. Features Securely Displayed - Weatherproof bungee and rubber inserts keep phone secure and protected while Delta's patented cam lock provides added security for your mobile phone on rough terrain. Compatibility - Bicycle mobile phone mount compatible with phones 3.5 inch wide x 0.5 inch depth x 7.8 inch length (up to iPhone 8+ Plus and Samsung Galaxy 9+ plus). Easily Accessible - Sliding system allows for easy in and out while on the go, so your phone is available for an important call, adjusting navigation, and you'll never have to miss the perfect photo opportunity. Quality Construction - Designed for road cycling, your mobile phone is fully enclosed and securely mounted in place with a built-in locking mechanism. Precision-engineered design grips your device, providing ease-of-mind on the roughest terrain. Multiple Mounting Options - Included handlebar and stem cap mounts allow you to position your mobile phone in your desired location. Securely mounts to handlebar diameters up to 1 3/8" / 35 mm Weight - 0.17 lbs / 80 grams

Extension Arm holds tablets at comfortable viewing distance. - For use with trainers and spin bikes only - Compatible with all Delta Tablet Holders (sold separately) - Premium aluminum construction - Instant attachment and removal - Rubber coated to protect stem and bars

The Fly12 front-facing bike camera and 600 lumen light is engineered for peace of mind on the road and a run time that lasts as long as you do.

From daily commute to weekend ride, the CatEye AirGPS is ideal for anyone who wants to measure time, speed and distance. Simply click through to a different data field and transfer your ride data to your Smartphone via App to upload to supported platforms. - Sensorless GPS computer - Simple setup via smartphone app - 3-row display. Middle and lower row display programmable by smartphone. - Backlight (Night mode) - Hassle-free operation. ClickTec™ button interface, and automatically saves ride data by powering off. - 10hrs runtime - Stores up to 80 hours worth of route recording - Import ride data to Cateye Cycling™ and view it on app

The Padrone features a large bike computer display, making it easy to see in all conditions. - The Padrone features the following measurements: Current/ average/ maximum speed, total distance, trip distance, elapsed time, clock, and stopwatch - Its large display size makes it easy to read while riding - Easy to set up, read and use - ClickTec button interface for easy use - Analog wireless computer - Programmable odometer - Auto start/stop - Menu screen to change setting

The Padrone features a large bike computer display, making it easy to see in all conditions. - The Padrone features the following measurements: Current/ average/ maximum speed, total distance, trip distance, elapsed time, clock, and stopwatch - Its large display size makes it easy to read while riding - Easy to set up, read and use - ClickTec button interface for easy use - Analog wireless computer - Programmable odometer - Auto start/stop - Menu screen to change setting - Battery indicator - Includes FlexTight universal mounting bracket - CatEye regular analog speed sensor (SPD-01) - Works with the slim speed sensor (SPD-02) used for Strada Wireless Slim as well - Battery type: Main unit = CR2032 x 1, SPD sensor = CR2032 x 1

The Padrone features a large bike computer display, making it easy to see in all conditions. - The Padrone features the following measurements: Current/ average/ maximum speed, total distance, trip distance, elapsed time, clock, and stopwatch - Its large display size makes it easy to read while riding - Easy to set up, read and use - ClickTec button interface for easy use - Analog wireless computer - Programmable odometer - Auto start/stop - Menu screen to change setting - Battery indicator - Includes FlexTight universal mounting bracket - CatEye regular analog speed sensor (SPD-01) - Works with the slim speed sensor (SPD-02) used for Strada Wireless Slim as well - Battery type: Main unit = CR2032 x 1, SPD sensor = CR2032 x 1 - Battery: 1, CR2032 Lithium Metal, 3(V), 0.735(Wh), 0.3g, Included

EPS chargers and charger accessories specifically designed for charging all Campagnolo EPS batteries. - Required for charging Campagnolo EPS V4 power units - Also compatible with Campagnolo EPS V2 and V3 power units - Power cable sold separately

In conjunction with the EPS Power Unit, the Interface is the "thinking" center of EPS and is responsible for on board diagnostics, managing settings, converting analog signal from Ergo Levers to digital and sending it on to the Power Unit maintaining a dialogue with the Power Unit. - Has been updated to work with 12-speed cassette sprockets - The V4 version enables automatic shifting once a set gear inch ratio has been reached following the gear change - Wireless system to communicate with the MyCampy app via pc / notebook / tablet / smartphone (BTLE), allowing the user of the EPS groupset to personalize settings - 500mm cable length to Ergopower controls - 550mm cable length to EPS V4 power unit

The EPS Power Unit is the systems source of power as well as the "brain" of the system, responsible for managing the battery pack, enabling and monitoring the front and rear derailleurs and communicating with the Interface Unit. - Weathertight, o-ring sealed connectors - Lithium Ion battery duration: 500km/month - 1500km, 1000km/month - 1800km, 2000km/month - 2000km - Water proof to 1m for 30 minutes (IP67 Rated) - Operational temperature: -4F to 140F - Charging temperature: 32F to 113F - The V4 power unit features 10% better battery duration - 16.6mm diameter for easy seatpost installation - 259mm length

In conjunction with the EPS Power Unit, the Interface is the "thinking" center of EPS and is responsible for on board diagnostics, managing settings, converting analog signal from Ergo Levers to digital and sending it on to the Power Unit maintaining a dialogue with the Power Unit. - Can be fit to the right-hand side (only on the right-hand side) of compatible handlebars or on the down tube of compatible frames - 2 connectors on the rear side - one to connect to the power unit (gray), and one to connect to the Ergopower controls (orange) - FD/Shifter Compatibility: EPS

EPS cable kits come in multiple options that allow for the mounting of the power unit beneath the bottom bracket or beneath the saddle. - Weathertight o-ring sealed connectors - Fitting the V4 internal interface to the frame requires 1 cabling from the interface to the Erogopower controls - 900mm from the interface unit to the splitter - 800mm from the splitter to the Ergopower controls

EPS cable kits come in multiple options that allow for the mounting of the power unit beneath the bottom bracket or beneath the saddle. - Weathertight o-ring sealed connectors - Fitting the V4 internal interface to the handlebar (only right-hand side) requires two cablings - 1 cabling from the interface to the Ergopower controls, and 1 cabling from the interface unit to the power unit - 100mm from the interface unit to the splitter - 340mm from the splitter to the right-hand side Ergopower control - 1300mm from the splitter to the left-hand side Ergopower control - 800mm from the interface unit to the power unit

Versatile and clever The Nyon is the perfect companion for embarking on your fully connected eBike experience. Nyon connects to your smartphone with the eBike Connect app and exchanges data about routes and activities. The color display serves as an intelligent guide when you are exploring new places and as your personal trainer by providing you with fitness data. The touch screen makes the all-in-one computer both intuitive and easy to use and is operated using the separate control unit during your ride. Whether you're using your eBike for long rides or short everyday trips, the robust, easy-to-read display ensures that you are ready for all requirements and weather conditions. The Nyon computer – for a smarter, more intuitive and connected generation. This is what Connected Biking feels like. Simple operation A convenient option: Nyon is intuitive to use thanks to the touch screen function and can be operated using the separate control unit during your ride. Award-winning design Impressive both inside and out: The 3.2-inch high-resolution color display combines smart functions with an elegant design that has won a Red Dot Design Award. Easy to read A clear view in any light: The display brightness and backlight automatically adapt to the ambient light. A special coating reduces glare and finger marks. You can choose between a dark and a bright display with maximum contrast. Individual screens Focus on the essential: You can customize the user interface of the display to suit your specific requirements. This gives you a clear view of the information that you need at all times. Always ready for action Whatever the weather: The touch screen of the robust display remains fully functional even when exposed to rain or dust and can be operated while wearing bike gloves. Savings Screen If you want to find out how much you could save by choosing to use your eBike instead of a car, check out the info on the new Savings Screen. This is activated in the screen management settings. You can also see a comparison of the current and previous weeks, or choose a different currency in the settings. Smart connectivity functions Perfectly connected: Nyon is part of an intelligently connected system and opens the door to the connected eBike World of Bosch thanks to the eBike Connect smartphone app and an online portal. Data synchronization Constant communication: As soon as Nyon connects to your smartphone or Wi-Fi, the computer connects to your eBike Connect account and automatically synchronizes the riding data. Choose your ideal position Optimum position: To ensure the best possible readability, the display mount has two installation positions. The center mounting position above the handlebar is designed to meet the needs of eMTB riders, while tour riders can place the mount further forward. One device, several users One for all: You can share your Nyon with friends or family – everyone can then synchronize their riding data with their own account. Software updates Always up-to-date: Software updates or new maps can be conveniently downloaded and installed over the air. Retrofit Kit includes head unit, display holder, mounting plate, screws, remote with attached cable, downtube cable, spacers (31.8 mm, 25.4 mm, 22.2 mm)