Parts & Accessories

Stay aware of approaching cars with Varia RTL515 rearview radar. It pairs with your Edge bike computer or compatible smartphone to alert you of vehicles approaching from behind up to 153 yards (140 meters) away. When used with your compatible smartphone, the Varia app uses bold graphics — plus tone and vibration alerts — to indicate the position and speed of approaching vehicles. MAXIMUM AWARENESS - Varia RTL515 rearview radar provides visual and audible alerts for vehicles approaching from behind up to 153 yards (140 meters) away. MULTIPLE PAIRING OPTIONS - This radar works seamlessly with your Edge bike computer or compatible smartphone as well as select Garmin wearables or the optional radar display unit. WORKS WITH THE VARIA APP - This smartphone app helps you increase your awareness by providing graphics — plus tone and vibration alerts — that indicate the position and speed of approaching cars. THIRD-PARTY APP COMPATIBLE - When used with a compatible smartphone, Varia radar integrates with your favorite apps, such as Ride with GPS to overlay your maps with rearview radar alerts. SUPERIOR VISIBILITY - Alert motorists to your presence as soon as possible with daylight visibility up to 1 mile. COMPACT DESIGN - Easily mount this sleek, compact device on the seatpost of almost any road-use bicycle. The vertical design allows for better leg clearance and a perfectly comfortable ride. PELOTON MODE - Varia RTL515 features multiple modes, including peloton mode, which provides a low-intensity flash that is kind to other cyclists’ eyes when riding in a group. BATTERY LIFE - Time spent charging is not as good as time spent riding. Get up to 16 hours of battery life in day flash mode and up to 6 hours in solid mode. Physical Specifications - Dimensions: 3.9” x 0.8” x 1.6" (98.6 x 19.7 x 39.6 mm) - Weight: 2.5 oz (71.0 g) - Modes: solid, peloton, night flash, day flash - Lumens: 20 solid, 8 peloton, 29 night flash, 65 day flash - Battery life: 6 hours solid, 8 hours peloton, 6 hours night flash, 16 hours day flash - ANT+: Yes - BLE: Yes - Water rating: IPX7 - Viewing angle: 220° In the box: - Varia RTL515 - Mounting Kit - Cables - Documentation

For optimal functionality. - Not Bosch Smart System compatible - Designed for Rail Gen 2 frames - Refer to Service Manual for assembly instructions and service

Replacement chainstay cover for DuoTrap S Digital Sensor

Get your computer dialed with the perfect magnet Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. - Universal crank magnets sized for your bike and sensor - Compatible with all cadence sensors

Blendr is the ultimate system for clean and easy integrated installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr GoPro Mount for a clean, flush look that securely holds your GoPro in a centered location. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for GoPro camera - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount front light and camera accessories on the front of your Bontrager Circuit MIPS road bike helmet. - Tested with an accelerometer for intended breakaway point if involved in a crash

Connect ANT+ and Bluetooth Smart devices to all of the data available from the DuoTrap S sensor for your on-the-bike wireless needs. • ANT+ 2.4 GHz and Bluetooth Smart wireless digital speed and cadence sensor • ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone • For use with many ANT+ and Bluetooth Smart wireless technology enabled devices • Includes Bontrager wheel magnet, crank cadence band, and CR2032 battery • Works with Trek DuoTrap compatible bikes

Key features: - Replacement strap for Bontrager Heart Rate Belt - Perfect option when the strap loses stretchiness or gets funky - Not compatible with other heart rate monitors

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Garmin High Mount for a clean, flush look that securely holds your Garmin centered over the stem. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Garmin GPS - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

See and be seen with original equipment lighting accessories. Ensure your lights are always ready to go when you are with this fast-charge USB cable. PRODUCT DETAILS - USB-to-USB-C cable to recharge your Bontrager lights - Compatible with most other USB-C devices - Quick charge - 230mm long

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr SRM Mount for a clean, flush look that places your SRM Head Unit exactly where you want it. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for SRM head unit - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

Quickly and easily swap your Bontrager or Trek cycling computers and wireless sensors between bicycles without tools with these silicone mounting straps. Large and small sizes ensure proper fit on most forks. • Designed for Bontrager and Trek analog wireless computers • Interchange analog wireless sensor installs and removes in seconds without tools • Interchange sensor includes both L and S silicone mounting straps to fit most forks • Batteries can be found in computer accessories

- Machined protective case that houses the Apple AirTag under your saddle. Apple AirTag sold separately - Casing is not waterproof but the Apple AirTag is rated IP67 (water resistant) - Compatible with some saddle bags - Mounts to saddle rails

Wahoo USB ANT+ dongle Kit connects KICKR, KICKR SNAP and other ANT+ enabled devices to a Mac or PC. The 3-foot extension cord extends the USB ANT+ transmitter away from the computer and towards the connected device to avoid signal interference.

EPS cable kits come in multiple options that allow for the mounting of the power unit beneath the bottom bracket or beneath the saddle. - Weathertight o-ring sealed connectors - Fitting the V4 internal interface to the handlebar (only right-hand side) requires two cablings - 1 cabling from the interface to the Ergopower controls, and 1 cabling from the interface unit to the power unit - 100mm from the interface unit to the splitter - 340mm from the splitter to the right-hand side Ergopower control - 1300mm from the splitter to the left-hand side Ergopower control - 800mm from the interface unit to the power unit

The EPS Power Unit is the systems source of power as well as the "brain" of the system, responsible for managing the battery pack, enabling and monitoring the front and rear derailleurs and communicating with the Interface Unit. - Weathertight, o-ring sealed connectors - Lithium Ion battery duration: 500km/month - 1500km, 1000km/month - 1800km, 2000km/month - 2000km - Water proof to 1m for 30 minutes (IP67 Rated) - Operational temperature: -4F to 140F - Charging temperature: 32F to 113F - The V4 power unit features 10% better battery duration - 16.6mm diameter for easy seatpost installation - 259mm length

Where your gaze goes, your light follows Add the safety of visibility to your helmet and light up the trail with help from the Bontrager Blaze helmet mount. Compatible with all Ion headlights. - Quickly mount front light and camera accessories on the front of your Bontrager Blaze WaveCel helmet - Tested with an accelerometer for intended breakaway point if involved in a crash

SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap

Monitor your pedaling cadence as you ride with this easy-to-install wireless sensor. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes. Simply attach the sensor and ride. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes.

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

Convert your K-Edge Garmin Computer Mount to be a Computer + Action Camera combination mount. Works with any camera that utilizes the GoPro sytle interface, including GoPro Hero, Garmin VIRB, and Shimano CM-1000. - Camera Adapter mount with GoPro style interface - Fits K-EDGE Garmin Mounts (K13-500, K13-505, K13-560) - Locks GoPro, Shimano, VIRB style cameras underneath Garmin Computer. - Centers camera in out of site position - Improves video clarity by removing plastic mount shake - Colors: Anodized Black - Weight: 14grams *Note: Garmin VIRB requires the GoPro adapter that is included in the box with the VIRB.

Keep your computer and sensors ready for every ride with replacement batteries Key features: - CR2032 battery is used for most Trek and Bontrager computers - 23AE battery is used for the Bontrager Interchange Analog Wireless Sensor - LR44 and L1154 batteries are identical and used in Bontrager SpeedTrap Sensor

Bontrager's DuoTrap Digital Speed/Cadence Sensor pulls double duty for your ANT+ cycling computer. It wirelessly transmits speed and cadence data and fits directly into the chainstay of certain Trek bicycles for a clean look that installs in seconds.

Know what's coming. Ride with extra confidence with Trek CarBack Radar Rear Light. CarBack's radar helps detect rear-approaching vehicles from up to 240m and provides audio and visual alerts through paired GPS head units for increased on-bike awareness. Built with integrated best-in-class Daytime Running Lights that are visible from up to 2km away, CarBack is a must-have for every cyclist riding on shared roads. - CarBack can detect and alert riders of rear-approaching vehicles from up to 240m away - Compatible with most cycling GPS computers - Pair CarBack with the Trek Accessory app to see a vehicle's rear-approaching and passing distance on your smartphone - Designed with focus, flash, and range to be Daytime-visible from up to 2km away - Four light flash modes: Day Flash 90LM, Day Steady 25LM, Night Steady 5LM, and Night Flash 5 LM - Visible fuel gauge LEDs make it easy to see CarBack's 7+ hour battery status - IPX7 waterproof rating to confidently ride through wet conditions - Includes Quick Connect Plus rear mount and USB-C charging cable

Pro Blendr is the ultimate computer integration system for clean and easy installation, made from durable alloy. - Blendr is an elegant, integrated accessory mounting solution - Alloy design provides clean and secure mounting of computers - Adapter pucks available for Wahoo and Garmin computers (sold separately) - Compatible with all Blendr bases - Attach your Garmin tether for an additional layer of security

- Replacement bike mounts and other accessories for your Garmin products

The Vibe Aero Race Mount is designed for the PRO Vibe Aero handlebar/stem combination. Made of high-quality CNC machined 6061-T6 Aluminum, it fits all Pro handlebar/stem combinations. - Compatibility (Regular): GARMIN 820, 520, 25, 20 - Compatibility (XL): GARMIN 1030, 1000, 820, 520, 25, 20 - Lifetime Guarantee - Weight: 30g

K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility: Wahoo Bolt - Fits Handlebars: 31.8MM - NOT GoPro Interface Compatible - Anodized Color: Black Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Sigma instructions that recommend use of the provided tether leash.

The SmartphoneHub transforms your bike into a fully networked eBike. The smartphone and COBI.Bike app turn the SmartphoneHub into an intelligent control center that can be used for navigation, recording activities, and connection to other. The eBike can also be ridden without a smartphone due to the integrated display in the SmartphoneHub, showing the most important riding data. - The SmartphoneHub and the COBI.Bike app connect the eBike to the digital world and allow for navigation, music streaming, fitness tracking, and integration of other services and apps such as Strava - A 1.52-inch display allowing for use without a smartphone - The COBI.Bike app gives eBikers a permanent overview of the most important training data. such as performance, cadence and calorie consumption - The COBI.Bike app allows access to music and audiobook streaming services, such as Spotify or Audible, which can be operated by remote control - The SmartphoneHub charges phones using the eBike battery - Walk assistance function helps you push your eBike at speeds of up to 6 mph

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Trip Computer Mount for a clean, flush look that securely holds your Bontrager Trip computer in a perfect position to see on the go. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Insta-Mount or Trip Computer - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)