Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Racks

Topeak VersaCage
$24.95
Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches
Topeak MTX Dual-Side Frame
$29.99
Boost the carrying capacity of your Topeak MTX BeamRack (sold separately) with their Dual-Side Frame. It enables you to attach panniers and other Topeak MTX bags to your BeamRack.
Topeak MTX BeamRack EX
$44.95
A lighter duty version for MTB and commuter use. QR mechanism is secure and easy to use. 7 kg (15 lb) carrying capacity. Compatible with all MTX TrunkBags. Includes hidden storage tray, rubber bungee and safety reflector. - Clamp: Fits 25.4/31.8 mm (shims Incl.) - Bag Compatibility: MTX TurnkBags - Material: Aluminum beam / Plastic cargo deck - Max Weight Capacity: 7 Kilograms - Size: 51 x 12.5 x 9 cm / 20.1” x 4.9” x 3.5” - Weight: 688 grams
Topeak BabySeat II Rack (Disc Mount)
$54.99
Topeak's Disc-Mount Rack allows you to easily mount your BabySeat II or your Topeak MTX TrunkBags (both sold separately) to your bicycle. And, this tubular aluminum rack features tabs that clear most disc brake mounts so you can use your disc brake-equipped bike to run errands with your favorite little passenger or extra storage room.
Topeak Explorer Tubular Rack w/Disc Mounts
$54.99
Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes with disc brakes, and has a center strip that acts like a short fender, too.
Topeak BabySeat II Rack (Disc Mount, 29-inch)
$59.99
Topeak's BabySeat II rear rack allows you to easily mount your BabySeat II (sold separately) to your 29er. This tubular aluminum rack features tabs that clear most rear disc brake mounts so you can use your disc brake-equipped bike to run errands with your favorite little passenger.
Topeak Explorer 29er Tubular Rack w/Disc Mounts
$59.99
Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap onto your big-wheeled bike. It's made of tubular aluminum, fits most bikes with disc brakes, hauls up to 55 pounds and has a center strip that acts like a short fender. It's compatible with Topeak's QuickTrack bags and accessories (sold separately), too.
Topeak MTX BeamRack
$59.99
Topeak's MTX BeamRack is an awesome way to add touring capacity to bikes that won't accept conventional racks, such as dual-suspension mountain bikes. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 20-pounds with ease.
Topeak Uni Explorer Rear Rack (Disc)
$64.99
For 24"-29" & 700c Wheels w/ Disc Brakes This one-size-fits-all aluminum tubular rear rack is equipped with adjustable legs to fit most 24" to 29" wheel MTB and 700C touring bikes with disc brakes. This tough tubular rack is perfect for touring, commuting, or running errands in town. The MTX QuickTrack plate is compatible with any Topeak MTX TrunkBag, MTX rear basket, and most other rack packs and panniers on the market. - Includes mounting bracket (26.5cm) - Adjustable length, Solid fender top - RedLite Mount, Tail Light Mount - Attachment: Frame rack bosses - Compatibility: MTX TrunkBags / MTX rear baskets - Material: 6061 T-6 hollow aluminum - Max Weight Capacity: 26kg / 57lb, Meets EN 14872 / ISO 11243 - Size: 41 x 34 x 25cm /1 6.1" x 13.4" x 9.8" - Weight: 820g / 1.81lb Adjustable Height - Shorten: 339mm (+-3mm) - Middle: 359mm (+-3mm) - Longer: 379mm ( +-3mm)
Topeak Uni Supertourist Fat
$99.99
This one-size-fits-all aluminum tubular rear rack is designed exclusively for Fat Bikes with disc brakes. The rack legs are adjustable to fit most 24” & 26” wheel Fat Bikes. The integrated side bar provides a lower pannier attachment point allowing more space for cargo on top of the rack. The MTX QuickTrack plate is compatible with any Topeak MTX TrunkBag, MTX rear basket, and most other rack packs and panniers on the market. Not compatible with asymmetric rearstay design fat bike frames.
No Image
$119.95
The perfect quick-mount rear rack system attaches to road, cross, hybrid or touring bike seatstays. This one-size-fits-all front rack features an innovative top plate that adjusts to levels independent of the seatstay angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook-and-loop-strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. - Attachments: Seatstays with hook-and-loop straps - Adjustment: Strut slots - Material: Aluminum / Engineering grade polymer / Nylon straps - Compatibility: Topeak MTX / RX TrunkBags - Max Load: 9kg / 20lb - Clamp for rear reflector, tail light mount - Size: 39.5 x 30 x 12cm / 15.6" x 11.8" x 4.7" - Weight: 870g / 1.92lb
Salsa Anything Cage w/ Straps
$30.00
With Salsa's Anything Cage, you can easily carry gear, like insulated Nalgene bottles, a small tent, or sleeping bag on your bicycle! This durable aluminum rack is designed for Salsa bicycles with their 3-hole high/low bottle mounts. It also attaches to standard bicycles with 2-hole bottle mounts simply by zip tying the rack's third foot. Cinching nylon straps are included for securing your items to the rack.
Salsa Down Under Front Rack
$69.99
• Tubular 6061-T6 aluminum construction • Three-position mid-blade mount for improved fit • Large pannier hook stops • Powdercoat finish • Maximum recommended load 33lbs (15kg) • Requires inner and outer mid-blade eyelets
Salsa Wanderlust Rear Rack
$99.99
Salsa's Wanderlust Rear Rack carries essentials for touring and bikepacking over the rear wheel of your bike. It's constructed from aluminum to keep the weight down and features multiple cross bars for panniers, a taillight mounting bracket, and a long, cupped deck to load up your gear. For easy installation, the Wanderlust features long, very adjustable struts.
Salsa Down Under HD Front Rack
$110.00
The Down Under HD Rack is the recommended lowrider for world touring. Sturdy and dependable, the steel construction lends itself well to field repairs should a worst-case scenario occur. - Requires dual-sided, mid-blade mounts - Wide crossbars provide sturdy, secure attachment points for a pannier - Tubular 4130 CroMoly construction - Mounting system provides 35mm range of infinite adjustment to position the rack - Includes mounting hardware kit - Powdercoat finish - Maximum Recommended Load: 55lbs (25kg) - Sold in pairs - Requires inner and outer mid-blade eyelets
Salsa Alternator Extra Wide Rear Rack
$120.00
The Alternator Rack 190 is the rear rack solution for all Salsa 190mm-spaced Alternator dropout equipped frames. Load up your panniers, get off the beaten track, and start exploring! - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular AL-6061-T6 construction - 135 x 325mm cupped deck - Extra-long struts for improved range of fit. Straight and shaped (kinked) struts included - Large pannier hook stops - Black powdercoat finish - 15kg maximum recommended load - Mounting kit included - 765g
Salsa Alternator Low Deck Rack
$120.00
The Alternator 135 Low Deck fits Salsa 135mm-spaced, Alternator dropout equipped frames using a non-plus-sized tire. It features a lower and narrower deck that fits better over and around tires up to 29 x 2.1" (without fenders), as well as 700c and fender setups. - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular 6061-T6 aluminum construction - 135 x 345mm cupped deck - Extra-long struts for improved range of fit; straight and shaped (kinked) struts included - Black powder coat finish - 765 grams - Weight Limit (lbs): 59.5 lbs.
Salsa Alternator Standard Rear Rack
$120.00
Set out on an adventure with Salsa's Alternator Rear Rack. Built for 135mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.
Salsa Alternator Wide Rear Rack
$120.00
Set out on an adventure with Salsa's Alternator Rack. Built for 170mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.
Portland Design Works Takeout Front Basket
$119.99
Get it to go with Portland Design Works' Takeout Basket. This handsome rack attaches to your handlebars for easy access to the included waterproof, removable roll-top bag. The rack is made from light, sturdy aluminum tubing and includes thoughtful features like an eyelet for mounting a light and a slot for carrying your u-lock (both sold separately). - Conveniently carry a six pack of bottles, five burritos, three chinchillas or an extra layer of clothing - Fits 25.4 - 31.8mm handlebars (even fits between drop bars) - Includes water resistant roll top bag that clips securely into basket - Eyelet for attaching light mount - Integrated u-lock carrying slot - Rugged, lightweight 10 mm alloy tubes - Rack weight: 500 grams - Inside of basket dimensions: 155mm x 255mm x 105mm - Lifetime PDWarranty
Electra Townie Alloy Rack
$49.99
Add more utility to your Electra Townie with the Townie Alloy Rack. This aluminum rear rack features a sturdy design that attaches quickly and easily so you can bring along nearly anything your heart desires. The platform acts as a short fender, too.
Electra Women's Cruiser Classic Rack
$49.99
Add more utility to your Electra Cruiser with the Cruiser Classic Rack. This aluminum rear rack features a sturdy design and attaches quickly and easily so you can bring along nearly anything your heart desires.
Electra Loft Rear Rack
$54.99
So versatile, it carries everything but the weight of the world.
Electra Townie Interchange Compatible Rear Rack
$64.99
Designed to complement the clean lines of the Townie collection, the Townie rear rack enhances utility while still looking great. - Interchange Compatible. Perfect Fit for Commuter Rear Rack Bag - Compatible with the Townie 26-inch wheel models 2007 and after - Alloy aluminum rack - Carrying capacity 55lbs (25kg) - Stainless steel hardware included
Electra 26-inch Compatible Rear Rack
$69.99
So versatile, it carries everything but the weight of the world. - Alloy heavy-duty 12mm diameter bars - Carrying capacity: up to 25kg or 55lbs - Stainless steel hardware included - Rear rack designed to be compatible with most Electra 26" wheel models - Rear rack not compatible with Electra 26" Townie Go! 8D
Electra Surf Rack
$109.99 - $139.99
• Paddle cradles w/15mm straps keep your board safe and secure, easily removed when not needed • Shortboard rack features strong extruded aluminum clamp with durable anodized finish • Fist most bikes with seat post diameters of 25-32mm diameter and carries most surfboards up to 8' in length • Longboard rack with adjustable-length arms fit most 26" wheel bikes, lightweight alloy construction, 25kg/55lb capacity • Longboard rack fits most surfboards up to 10' in length (not designed for stand-up paddleboards) • Rust-resistant hardware
Bontrager BackRack MIK
$39.99
Rack 'em up Turn your ride into a pedal-powered grocery-getter with the BackRack MIK. It is designed to mount to eyelets already built into your frame, so installation is easy. Plus, it has MIK compatibility so you can securely mount MIK trunk bags or accessories in seconds, along with integrated threaded accessory eyelets for added functionality and easy light installation. Product details - Quick and easy install adds storage and utility to compatible bikes - MIK mounting system provides secure, integrated mounting with compatible bags - Integrated eyelets make it easy to mount lights or other accessories - Compatible with MIK, standard trunk bags or panniers - Single-bolt strut mounts allow maximum adjustment and easy installation - Includes required mounting hardware - Max weight capacity 25kg (55 lbs.) Specifications - Size: Small 13-18" (33-46cm); Large 18-22" (54-62cm) - Rack type: Rear racks - Material: Aluminum
Bontrager Seatpost Rack
$39.99
Bontrager's Seatpost Rack is a great choice for frames without built-in eyelets, this versatile rear rack quickly attaches to your seatpost with an easy to use four-bolt design. Compatibility with Trek's Interchange System means it mates seamlessly with a variety of Interchange bags (sold separately) that install fast and secure. It fits both 27.2mm and 31.6mm seatposts.
Bontrager BackRack Lightweight MIK
$74.99
Turn your bike into a touring or commuting machine with the BackRack Lightweight Rack. It's our lightest rack without sacrificing strength or utility. Features MIK design for quick, secure installation and removal of MIK trunk bags and accessories, plus threaded accessory eyelets for functionality and easy light installation. Product details - MIK mounting system provides secure, integrated mounting with compatible bags - Lightweight, only 465g (16oz) - Includes adapter kit for mounting to most road bikes - Long-lasting, corrosion-resistant, stainless steel hardware - Frames must have brake bridge or seat stay eyelets - Not recommended for use with carbon dropouts - Integrated eyelets make it easy to mount lights or other accessories - Max load is 22.7Kg (50 lbs.) Specifications - Size: 13-22" (46-62cm) - Rack type: Rear racks - Material: Aluminum
Bontrager Carry Forward Front Rack
$89.99
Turn your bike into a touring or commuting beast with this bag-compatible, lightweight front rack that doesn't sacrifice strength or utility. The Lowrider front rack mounts directly to forks with fender eyelets or lowrider mounts to keep a low center of gravity when you load it up with your favorite gear. Includes threaded brackets for accessories. - Can be mounted to lowrider mounts or fender eyelets - Lowrider-style rack for secure and stable pannier mounting -Versatile design accepts lowrider and trunk style bags - Threaded accessory eyelets let you easily mount lights and other essential accessories - Includes hardware kit for mounting to both fender eyelets and lowrider mounts - Max load 33lbs
Page 1 of 2 Next page