The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links
This ultralight hex and bottom bracket wrench has a 1-inch hex at one end and an external BB cup spline at the other end. The 1-inch hex end features magnets that quickly couple with Wolf Tooth's steel hex insert tools. - 1-inch hex drive at one end and 16-notch 44mm bottom bracket tool (or centerlock rotor tool) at the other end - Includes the wrench only. Steel inserts are not included but can be purchased separately - 1-inch hex drive interface compatible. Magnets inset allow quick coupling and decoupling of steel inserts
Fix tubeless tire punctures and broken chains. This multi-tool has a chain tool on one end and a tire plug built into the handle, with inner storage for tubeless tire plugs. The full multi-tool was designed for use with an EnCase System Storage Sleeve, which fits inside bar ends of your handlebars. Ride with this multi-tool in a storage sleeve or in a tool wrap for easy repairs while riding. - Compatible with all bicycle chains, including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five bacon strip tire plugs included; refills available - Hardened steel chain pin driver for lifetime durability - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (sold separately) or carry in a jersey pocket - Chain tool driver requires 4mm hex (available on EnCase System Hex Bit Wrench) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)
The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead. - 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut - Magnets keep all bits in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar for extra torque when head is bent - 8mm hex bit tested to over 40 Nm torque - Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) - Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)
- Shimano, SRAM, Sun Tour, Chris King and Sun Race and others.
- Blade chrome plated, black anodised tip - Handle – polypropylene
Two 15 mm openings set at offset angles to easily remove pedals regardless of the pedal axle position
- Well thought out, extremely durable tool pallets organize and hold your tools in place. Pockets are designed with the size of our tools in mind. It also features a few extra pockets leaving you room to personalize your kit. - 48 pieces of our tools that are a perfect fit for a portable set, shop, home or team mechanics
Fix just about anything that comes your way when you're out on the road or trail. This sleek and compact multi-tool packs most of what you'll need to get yourself back out there, and home safe. 11 functions in one. 2, 2.5, 3, 4, 5, 6, 8 mm hex wrenches T25 Torx Phillips and Flathead screwdrivers Plus CO2 inflator Weight: 131 grams
Removes Presta and Schrader valve cores. CNC machined, anodized finish with laser-etched logo. Fits between spokes for quick and easy core removal. Features knurled end for a no-slip grip.
The Italian Army Knife, a very SILCA take on the traditional multi-tool. We've addressed the things that frustrate us with conventional multi-tools, while keeping the layout which fits so conveniently in the SILCA EOLO Wallet or Seat Roll Premio. The IAK as we have come to know and love this product combines fully forged mid-length tools with forged aluminum side plates and full stainless steel hardware. The mid-length tool design is long enough to provide access to recessed fasteners, but short enough not to experience twist or damage under moderate torque as experiences on longer tools. All tools are forged rather than bent from hex stock, this method of construction is more expensive, but worth it on the side of the road! Mid length tools also allow us to position the tools within the same plane, this reduces the thickness of the overall package by half. Double chromed tools and fully stainless steel hardware and bushings guarantee a long life without corrosion (the number 2 killer of multi-tools is corrosion, number 1 is loss!). Forged aluminum sidebars contain rare-earth magnets for holding a spare chain connector.
The Multi-Configurable, Multi-Functional Mini Ratchet Tool Kit - Cold Forged 1/4” Bit Driver Ratchet with Magnetic Extensions that Convert to a T-Handle plus a Stainless Steel 1/4” Extension - Includes S2 Steel Bits with Size Indication: 2, 2.5, 3, 4, 5, 6mm Hex T10, T20, T25 Torx® PH2 Philips Includes Custom Pack - Waxed Canvas with Reflective Cross-Stitch Quilting - Magnetic Closures double as Keepers for Steel Hardware when opened.
See instore to purchase. Like everything we do at SILCA, Ypsilon was designed by a team of engineers and mechanics who obsess over every fine detail. Unlike traditional Y-wrench designs, Ypsilon is customizable and adaptable to the mechanic’s preferences. We were able to do this by using a ¼” bit collet with magnetic attachment in place of the 6mm hex wrench which detaches. This departure from the traditional Y-wrench design was inspired by the versatility of our T-Ratchet + Ti Torque kit, and means that Ypsilon can easily transform into any tool you need simply by swapping out the bit. The other two ends of the tool are 4mm and 5mm hex keys. Another key benefit of Ypsilon is the tight tolerances of the keys and bits. Tighter tolerances mean a better tool fit which drastically decreases the likelihood of rounding out fastener heads. These tight tolerances, combined with the CrV steel spine of the tool make Ypsilon incredibly durable. A lightweight composite body with ergonomic grips provide good comfort and control with the contact points of your hand. The Ypsilon Travel Kit comes with everything that the Home Kit comes with minus the box.
Modern carbon rims and tires create a real challenge for traditional tire levers, and the new wave of tubeless setups have taken the challenge to the next level. Tire fits are tighter than they've ever been, while carbon rims require non-metal levers to resist damage to the bead or brake surface during use. Previous solutions to this problem have involved using a metal core inside of a plastic lever however, this solution has its own challenges as the core of the lever is where you can add the least stiffness and strength. This leaves metal core levers both less stiff and heavier than they need to be. - Forged alloy blade - Reinforced nylon Rim Shield safe for use on carbon rims - Integrated spoke-hook wing - 105mm x 25mm x 7mm (Perfect for Seat Roll Premio or EOLO Wallet) - Weight (Two levers and neoprene sleeve)—36 grams
The Italian Army Knife, a very SILCA take on the traditional multi-tool. We've addressed the things that frustrate us with conventional multi-tools, while keeping the layout that fits conveniently in the SILCA EOLO Wallet or MATTONE. The mid-length tool design is long enough to provide access to recessed fasteners, but short enough not to experience twist or damage under moderate torque as can happen on longer tools. All tools are forged rather than bent from hex stock. While this method of construction is more expensive, the value is unquestioned during a road-side repair. Mid-length tools also allow us to position the tools within the same plane, reducing the thickness of the overall package by half. Double-chromed tools and fully stainless steel hardware and bushings guarantee a long life without corrosion (the number 1 killer of multi-tools is corrosion). Forged aluminum sidebars contain rare-earth magnets for holding a spare chain connector. - Forged and machined sidebars with integrated chain-connector storage. - Nove (No-vay) 9 forged and plated tools: Hex 2/3/4/5/6/8 +Torx 25 +PH2/Flat - 8mm adapter connects to the 5mm hex for optimal use of space. - Stainless steel pivot hardware - NOVE- 79 grams
Shimano Wiring Plug Tool for use with Di2 - Tool is required to assist Di2 shifter plug installation - Shimano TL-EW02 tool for connecting and disconnecting the Di2 wiring harness and shifter plugs - For use with Dura-Ace 9070, Ultegra 6870/6770 and Alfine Di2 components and E-Tube wiring
Shimano Genuine disc brake bleed Funnel unit for ST type Road brake lever (M7 thread bleed port) Features: - Oil spill guard lid with an integrated oil stopper holder - Funnel base - Bleeding instructions available for download under 'Documents & Links' below
Shimano Genuine disc brake bleed Funnel unit for BL type MTB brake lever (M5 thread bleed port) Features: - Oil spill guard lid with an integrated oil stopper holder - Funnel base - Bleeding instructions available for download under 'Documents & Links' below
Serfas' Slimline mini-tool has everything you need for road and trail fixes in an incredibly compact package. It includes: 2, 2.5, 3, 4, 5, and 6mm Allen keys, a T25 Torx wrench, a spoke wrench and a chain tool. This compact, functional tool also tucks away Phillips and flathead screwdrivers between it's thin chrome body.
SRAM Bleeding Edge Tool. - Use with Avid or SRAM Pro Bleed Kit
RockShox, 00.6815.066.010, Reverb oil height tool
$49.00 - $77.00
- Essential mechanic tools to properly service and maintain all RockShox products - Clamps the shock body for easy maintenance
Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.
Periodic hydraulic remote bleeds are necessary to maintain consistent performance. RockShox's Bleed Kit has everything you need to keep your Reverb and X-Loc remotes functioning at their best.
- RockShox, 11.4118.038.000, Service kit, Monarch B1RL C1 R, RT, RT32014+
Oil Level Adjuster (for checking and adjusting oil level) -Reverb/Motion Control Dampers /Turnkey Dampers
- Alloy body with chrome plated tools - Hex 2 / 2.5 / 3 / 4 / 5 / 6 / 8mm - PH2 screwdriver - Torx 10 / 26 - Chaintool - Spoke wrench 3.6 / 3.75 / 4.0 / 4.4mm - Chain holder - Tire lever - Brake pad spreader
Proof that simpler is better. Pedro's tire levers are the gold standard when it comes to removing the toughest tires, out on the road or at home. Lifetime warranty! In the unlikely event you should happen to break your Pedro's levers, your replacement is free.
- Perfect for the common 5mm hex hardware found on every modern bicycle. - Ergonomic dual-density screw driver handle. - Features extra long hex key and second ball-end. - Designed to stand up to the harsh conditions of professional use. The 5mm hex is by far, the most common size hex found on modern bicycle. Inspired by our other hex driver sizes, which are some of the most comfortable and ergonomic hex wrenches we've ever used, we decided to bring you these features in the common 5mm size. Features include an ergonomic dual-density screw driver handle for comfort and control, an extra long hex key for exceptional leverage, a second ball end for quick and easy installation or removal, and heat-treated S2 tool steel construction for the ultimate in strength and lasting performance. Backed by Pedro's lifetime warranty.
Park's Chainring Nut Wrench makes chainring bolt installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. And, it's double-ended to fit most slotted-type nuts, including Campagnolo chainring bolt nuts.
Page 1 of 4 Next page