Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts

iSSi Cleat Set
$18.99
iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered. • 4 degrees of float both inward and outward
iSSi Road Cleats
$25.00
The split-cleat system makes cleat swapping a snap – no need to worry about losing your cleat’s position. Available in three different float options to suit your style. - 0, 4.5 or 9-degree cleat options - Cleat bolts and washers included - 4mm hex wrench required to install
Zipp Bearing Kit: For 2009-Current 88/188 Hubs
$49.99
Zipp Speed Weaponry Cartridge Bearings - Will not work on Zipp 188 V9 rear hubs
Zipp Service Course SL Stem
$111.99
Zipp's Service Course SL Stem provides strength and reliability at just 120 grams. Forged of 7075 aluminum with titanium bolts, the SL is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.
Zipp Service Course Stem
$64.99
Zipp's Service Course Stem is strong, light, and reliable. Forged of 7075 aluminum with stainless steel bolts, the Service Course is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.
Zipp Tangente Cork Brake Pads
$39.99
Zipp's Tangente Cork Brake Pads are perfect for Zipp wheels with carbon braking surfaces. They are made of a composite cork polymer for consistent brake response and to reduce glazing from the intense heat caused by braking on carbon. As a result, the Tangente cork pads avoid the brake pulsation produced by residue buildup from rubber pads and can even eliminate pulsation from rims with previous buildup. These pads have a unique shape with more material in the front to improve durability and shed water. Although the composite material wears similarly to low-temperature rubber compounds, the Tangente cork pads last longer than most rubber carbon-specific pads because of the shape and 0.5 mm greater overall thickness.
Zipp Tangente Platinum Pro Evo Brake Pads
$44.99
Zipp's Tangente Platinum Pro Evo Brake Pads are made for wheels with carbon braking surfaces. These fine pads provide confident, smooth braking power in all conditions and they are specially made for long life. They have a large surface area for maximum stopping power and deep grooves to shed water from the rim and ensure the Evos grip great even when it's wet. These stoppers are also thin so they'll work nicely on time trial and triathlon bicycles with integrated brakes and tight clearances.
Zipp Vuka Alumina Clip Extension Mounts/Armrests
$121.99
Zipp’s Vuka Alumina Clip Extension Mounts/Armrests are made of light, strong, stiff 2014-series aluminum and have nylon armrests with wide, comfortable foam pads. They're perfect for mounting your favorite extensions (sold separately) and finding your optimal aero position. There's also a model that goes above and beneath your base bar.
Zipp Vuka Alumina Clip/Stealth/Aero Armrest Kit
$39.99
- Elbow pads embossed with Zipp brand logo - Includes 2 foam pads, 2 velcro, and 2 base plates - This may be used with the older Vuka Clip - Bolts are NOT included and the bolt kit varies with clip type
Zipp Vuka Elbow Pad Wing Extensions
$24.99
Adjust the width of your arm rests to ensure optimum airflow, power transmission, and comfort when doing a TT or bike leg. - Four positions reversible inwards or outwards for the ultimate in positioning - Bolt holes 25.0mm center to center - Fits Vuka Aero, Vuka Clip, Vuka Stealth
Yokozuna Brake And Derailleur Casing
$4.00 - $105.90
- Housing features the Jet Lube Process, which injects the proper amount of grease from end to end and results in 10 percent less cable drag - Lead and Dioxin free. Made in Japan
Yokozuna Brake Cable
$6.99 - $202.93
- All Yokozuna cables have High-grade raw materials, flexibility, strength, tight construction and excellent quality control - Premium Stainless steel for greater durability - Standard cables are High strength die-drawn steel cable with proprietary SN56 plating that exhibits corrosion resistance superior to a zinc galvanized cable - Made in Japan
Yokozuna Derailleur Cable
$6.99 - $189.90
- All Yokozuna cables have High-grade raw materials, flexibility, strength, tight construction and excellent quality control - Premium Stainless steel for greater durability - Standard cables are High strength die-drawn steel cable with proprietary SN56 plating that exhibits corrosion resistance superior to a zinc galvanized cable - Made in Japan
Xpedo XPR Cleat Set
$32.99
Xpedo XPR cleat set for R-FORCE 6 is an SPD style cleat specifically designed for 3-hole road shoes. - Weight: 135g per set with hardware - Float: 6°
Xpedo Spry Pedals
$89.99
Weighing in at a mere 260 grams per set, the SPRY, with its sleek, super low-profile design, makes a great addition to the XPEDO flat pedal line up. The magnesium-cast body measures only 11mm thin and allows plenty of ground clearance in the most aggressive terrains. Its large platform area with 14 pins on each pedal provides superior grip for maximum pedal efficiency. - Weight: 260g - Body: Magnesium - Spindle: CroMo - Bearings: 2 Cartridge - Bushings: 1 DU - Pins: 28 Straight Pins per pair - Size: 106x100x11 (mm)
Xpedo Thrust NXL Pedals
$79.00
- Weight: 245g  - Body: NEP Injection-Molded - Spindle: Cromoly  - Bearings: Loose Ball - Springs: SWP  - Q-Factor: ±53 (mm) - Cleat: XPEDO THRUST 7 (6º Float or Fixed)
Xpedo Thrust NXS Pedals
$99.00
- Weight: 220g  - Body: NEP Injection-Molded - Spindle: Cromoly  - Bearings: 3 Cartridge - Springs: SWP  - Q-Factor: ±53 (mm) - Cleat: XPEDO THRUST 7 (6º Float or Fixed)
Wolf Tooth Components 110 BCD Asymmetric 4-Bolt for Shimano Cranks
$79.95 - $99.99
Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our patent pending Drop-Stop technology. These beautifully machined 110 BCD Asymmetric 4-bolt chainrings are optimized for your 1x Shimano CX/ Road/ Gravel drivetrain whether you run Dura Ace 9000, Ultegra 6800, 105 5800, or Tiagra 4700. They are also offset for the ideal 1x chainline. Compatibility: - These rings are for use with 110 BCD Asymmetric 4-bolt cranks. - Compatible with Dura Ace 9000, Ultegra 6800, 105 5800, Tiagra 4703, and Tiagra 4700 - Sizes 38T and larger are compatible with Dura Ace 9100, Ultegra 8000 and 105 R7000 but a slight modification is required due to a change in the crank arm profile. The 36T chainring will not work for this modification. - Mounts in the big ring position of the cranks but is offset inward for perfect chainline. - The stock 2x bolts will not work. You will need 6mm bolts which are optimized for single ring mounting. - For 1x9, 1x10, 1x11 and 1x12 drivetrains including SRAM Eagle (TM) - Compatible with all 10, 11, and 12 speed chains including SRAM Eagle (TM) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).
Wolf Tooth Components 25mm B-Screw
$1.99
- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs
Wolf Tooth Components Cyclocross Chainring
$79.95 - $99.99
- Cyclocross ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy
Wolf Tooth Components Giant Cog
$74.95 - $99.99
- Extended range aluminum cog for those wanting 1x10 with a full range of gears - Only fits Shimano XT/XTR 11-36t (M771/M980) or SRAM X5/X7/X9/X0 11-36t 10sp cassettes (not compatible with 2011 and older SRAM derailleurs) - Requires removal of the 17T or 15T cog and spacer from existing cassette - Longer B-screw (sold separately) only needed for about 50% of Shimano derailleurs - May require a longer 10sp chain. Very tight fit on Stans 330 rear hub splines - Designed and manufactured in the USA from 7075-T6 aluminum alloy
Wolf Tooth Components Ultralight Stem Cap With Integrated Spacer
$13.99
This stem cap is where your bike fashion sense and the weight weenie in you collide. This Ultralight and ultra-sleek stem cap integrates a 5mm, 10mm or 15mm headset spacer with your stem cap in finely machined piece. Why have extra steerer tube requiring spacers on top of your stem you ask? Well, many carbon steerers require that the steer tube extend above the stem. Also, riders may want the flexibility to move handlebar height up and down for different types of riding or for bike re-sale. - Design and manufactured in Minneapolis, MN USA - 1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only - 6061-T6 aluminum - 5mm internal cylinder wall height - Black aluminum bolt included Total weight (cap + bolt): 5mm= 12g. Compare to a standard flat stem cap and steel bolt at 20 grams + spacers add even more.
Wippermann Chain Connectors
$5.95 - $13.95
- 10-speed: stainless steel 6.1mm wide no tool chain connector for Shimano and Campagnolo - 9-speed: stainless steel 6.5mm wide no tool chain connector for Wippermann chains - 6-8 speed: stainless steel 6.8mm wide no tool chain connector for Wippermann chains
Whisky Parts Co. No. 7 12f Drop Bar
$79.99 - $80.00
Whisky's No.7 12f is their most versatile drop bar. It's equally at home on tarmac, gravel or twisty cyclocross courses. From touring to racing, this modern bar is a great addition to almost any bike in your stable. The comfortable 12-degree flare provides excellent control and comfort, especially off-road, or in challenging conditions. A semi-compact design offers seamless transitions between positions. Available in a complete size range, this bar is a perfect fit for any rider. - 7050 Alloy - 282g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 12° - Measured Center-to-Center at the levers
Wheels Manufacturing Inc. 1-1/8-inch Headset Spacer Kit
$160.00
105 piece assortment of 1-1/8-inch aluminum headset spacers. Kit includes: - 1.5mm (Silver) qty. 15 - 2.5mm (Silver) qty. 15 - 5mm (Silver) qty. 15 - 7.5mm (Silver) qty. 5 - 10mm (Silver) qty. 5 - 1.5mm (Black) qty. 15 - 2.5mm (Black) qty. 15 - 5mm (Black) qty. 15 - 7.5mm (Black) qty. 5
Wheels Manufacturing Inc. 31.8 – 25.4 Handlebar Shim
$14.99
Shims for fitting 25.4mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 25.4mm - Length: 48mm - Machined Aluminum - Anodized Black
Wheels Manufacturing Inc. 386 EVO Adapter for 22/24mm Spindle Cranks
$50.00
The Wheels Manufacturing 386 EVO Adapter for 22/24mm Spindle Cranks adapts SRAM/Truvativ cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (1) - 24mm ID adapter (for right-side) - (1) - 22mm ID adapter (for left-side) - (8) - 0.7mm spacers
Wheels Manufacturing Inc. 386 EVO Adapter for 24mm Spindle Cranks
$54.99
The Wheels Manufacturing 386 EVO Adaptor for Shimano Hollowtech II Cranks adapts Shimano cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (2) - 24mm ID adapters - (8 )- .7mm spacers
Wheels Manufacturing Inc. 386EVO ABEC-3 Bottom Bracket
$89.99
Threaded ABEC-3 BB for 386EVO frames (86.5mm shell width, 46mm shell ID). Machined cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: BB386EVO - Bottom Bracket Shell Width (mm): 86.5mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 126g - Packaged for retail display - Will accept 24mm and 24/22mm cranksets using Wheels Mfg. 386EVO BB / Crank Adapters
Wheels Manufacturing Inc. 386EVO Angular Contact Bottom Bracket
$119.99
Threaded Angular Contact BB for 386EVO frames (86.5mm shell width, 46mm shell ID). Machined cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: BB386EVO - Bottom Bracket Shell Width (mm): 86.5mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 124g - Packaged for retail display - Will accept 24mm and 24/22mm cranksets using Wheels Mfg. 386EVO BB / Crank Adapters
Page 1 of 58 Next page