Designed to give you the Low Rider advantage, the M.U.L.E. LR combines the storage and features of your favorite M.U.L.E. pack with a lumbar reservoir based design that offers more stability during aggressive downhill rides or backcountry terrain. Instead of concentrating pack weight on your shoulders, this pack shifts the load to your hips for a lower center of gravity and more freedom of movement. The M.U.L.E. LR is built around our top-of-the-line 3-liter Crux lumbar reservoir that delivers more water per sip. And, the separate reservoir compartment is optimized for fast and fumble-free refills, no matter how full the rest of your pack is. The flip down reservoir garage also gives access to the tool roll and rain cover, so repair and weather essentials are always within quick reach. Easy-access storage on the harness gives immediate access to essentials without removing the pack. - All the features of your favorite M.U.L.E. pack with a lumbar design that shifts your load for increased stability - 3-Liter CRUX LR Reservoir with Integrated Compression: Keeps your fluids low and tight for better balance and increased pack stability - Magnetic Tube Trap: Keeps your tube secure and accessible when you need it - Helmet Carry: Universal hooks to stow your helmet when not riding - Cargo Compression: Keep your gear close to your body for better balance and increased stability - Soft-Lined Pocket: Keep sunglasses or electronics safe and easy to access - Adjustable Sternum Strap: Custom fit for a wide variety of chest sizes - Reflectivity and Light Loop: For added visibility and safety - Gear Capacity: 12L/730 cu in
The FC System was designed with one thing in mind: to bring together the most compelling details into one all-inclusive hydration system. - Streamlined Storage: New Profile Design FC Hydration Systems were designed with one thing in mind to create a clean front-end solution that thoughtfully integrates hydration, nutrition and electronic needs. Integrated storage streamlines nutrition needs into rear airfoil compartment. - Forward Computer Mount: Computer mount positions perfectly at the front of the system for optimal viewing. - Sealed cartridge bearings - No-Splash Refill Port: Brand new patent-pending refill port shields splash back. - Dual Straw Positioning: Strategically flexible to fit your preferences. A simple turn of the dial positions straw on the right or left side of the bottle. - Convertible Straw: Swap straw with gap cap to place straw in the front or rear of bottle. Specs - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 25oz (739ml) - Width: 65mm-140mm (center to center) - Weight: 250z (397g)
Quickly and efficiently take care of your aero hydration and computer holding needs with the Bontrager Speed Concept carbon Computer Cage. It allows bottle access while maintaining aero position and also incorporates an integrated bike computer mount. • Carbon fiber cage construction • Designed to be mounted to the Speed Concept Mono Extensions • Adjustable track mount system can mount to standard water bottle spacing and adjusted for perfect placement • Securely holds standard water bottles • Integrated computer mount will accept standard bar-mounted computer mounts • Adapter for SRM computer mounts included
This 12L daypack with 3L reservoir is totally new for 2018, with features for trail rides and commuting but versatile enough for a weekend hike. - Ventilated Ergostraps - Sculpted air mesh back panel - Waist belt zippered pocket - Valuables pocket - Hydration system compatible - Helmet holder - Elastic side pocket - Flexible gear storage - Hydration tube fastener - Hydration tube fastener - Eyewear holder - Key Holder - Water-resistant fabric - Water-resistant zipper - Glove-friendly zipper pull - Light attachment loop - Reflective detail - Lightweight
Profile Design's Aero HC Hydration System sports a sleek, aerodynamic design so you can stay hydrated and hidden from the wind. The bottle features an aerodynamic design and a removable nose so you can easily clean it.The integrated mount places your computer right where you can see it when you're in an aero tuck. With 35mm of width adjustment and independent fore/aft adjustment for the bottle cage, the Aero HC Hydration System is a key part on your aero bike.
A cage that won't slow you down This OCLV carbon fiber cage is so lightweight you'll hardly know it's there. (That is, until you reach down and remove your water bottle with ease.) Recommended for on-road use with small water bottles. - Strong and lightweight OCLV Carbon construction - Secure bottle retention designed for road bikes - Recessed bolts allow smooth bottle transition and better derailleur clearance - Includes lightweight alloy mounting screws - Weighs only 20g
The ideal option for hard-charging riders who need more than a water bottle, but who don’t want to carry a full backpack, the Repack offers a minimalist approach to wearable hydration. As part of CamelBak's Low Rider MTB collection, it keeps your water and cargo centered around your waist, leaving your shoulders and back free. As a result, you’ll have a lower center of gravity and more mobility on the trail — plus, no more sweaty back and sore shoulders at the end of the day. With a 1.5-liter reservoir, integrated carry pockets, and the stability of a customizable fit, the Repack frees you up to ride light and fast over any terrain. Features: - Load-Bearing Hip Belt with Cargo Pockets: Wide waist belt optimizes fit and keeps essentials close at hand - Integrated Carry Pockets: Keep your tools and repair kit organized - 1.5L CRUX Reservoir: Faster flow rate for better hydration - Dual Reservoir Compression Straps: Cinch the reservoir into the small of your back for stability and a tight fit - Magnetic Tube Trap: Keeps your tube secure and accessible when you need it - Reflective Accents: For better visibility in low light environments Specifications: - Hydration type: CRUX Lumbar Reservoir with Magnetic Tube Trap - Gear capacity: 2.5L/150 cu in - Pack weight: 310 g/0 lb 11 oz - Dimensions: 18.5 x 28 x 15.5 cm / 7.3 x 11 x 6.1 in - Fits torso: 71-116 cm/28-48 in - 4 exterior pockets
Mandible is the top Arundel model; its grip is the strongest of all Arundel cages. It's great in extreme situations. Mandible cages have weathered the Grand Tours, the Spring Classics, Worlds, all of it. Durable and elegant. - Weight: 28 grams
SideLoader cages solve the problem of cramped space on Compact style road frames, as well as MTB applications. One SideLoader plus one OtherSideloader (sold separately) outfits a standard road frame. The shape matches Dave-O's perfectly. SideLoaders are for seat tube mount, right side entry.
Be ready to ride at a moment's notice with plenty of space for MTB essentials on rides lasting two hours or less. Always be prepared For off-road riders who give up seat packs for dropper posts, Rapid Pack is perfect for mountain bike rides lasting two hours or less. Designed with a sleek aesthetic that makes you feel like you aren't wearing your uncle's fanny pack, this bag holds all your essentials when cargo pockets are being used and hydration packs are overkill. Product details - Lightweight stretch woven material is durable and works with the body's natural movements - Ridged foam back panel for breathability and comfort - Two zippered security pockets hold essentials - Left-side opening features internal mesh pockets for easy gear organization - Middle waterbottle pocket centralizes weight while riding - Right-side opening features internal mesh pockets with compression phone sleeve and key fob - Fits most tubes including fat bike and plus sized models
Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Tri-BackUp Elite is specifically designed for saddles with angled rear rails. - Material: CNC aluminum - Hydration Capacity: One or two bottles (up to 750cc each) - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Max Load: 2.5 kg / 5.5 lb - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included - Angle adjustable - Size: 8.6 x 7.6 x 7.4 cm / 3.4” x 3” x 2.9” - Weight: 102 g / 3.60 oz (Total) 88 g / 3.10 oz (w/o Inflator Bracket)
Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Elite 90 is designed especially for triathlon specific saddles with vertical rear rails. - Material: CNC aluminum - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Hydration Capacity: One or two bottles (up to 750cc each) - Max Load: 2.5kg / 5.5lb - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included - Angle adjustable - Size: 8.6 x 7.6 x 7.4cm / 3.4" x 3" x 2.9" - Weight: 102g / 3.60oz (Total), 88g / 3.10oz (w/o inflator bracket)
The Blackburn Clutch Cage proves that side entry bottle cages don't need to be hard to use. This high-end cage is designed to accommodate smaller and/or full suspension frames where standard cages do not fit. Slotted bolt holes allow for finely tuned adjustments, so it's easy to pull your bottle out no matter the shape or size of you favorite steed. The Clutch Cage is available in left or right entry and comes in four colors. - Designed for off road use - Left side bottle entry specific design - 30mm of vertical mounting adjustment - Made of rugged UD carbon fiber - 22 grams - Available in 4 colors
Fit for fondos, ready for races The carbon construction of the Pro Carbon Water Bottle Cage provides climbers with a lightweight solution that securely holds bottles over train tracks, rough roads, and rocky terrain. Ideal for both road and mountain bikes and available in a multitude of colors to suit your style. - Full carbon construction - Secure bottle retention suitable for road and mountain use - Includes lightweight alloy mounting screws - Available in a variety of colors - Weighs only 29g
- Stainless steel cage with a black vinyl coating - 5" Outer diameter cage velcros on any size frame tube or seat post - Will not scratch metal bottles or remove paint - Not recommended for glass - Proudly made in chicago, Illinois
- Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 46 x 23 x 8 cm / 18 x 9 x 3 in
The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks. - Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 38 x 19 x 6 cm / 15 x 7.5 x 2.5 in
The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks. - Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 30 x 18 x 6 cm/ 12 x 7 x 2.5 in
Have you ever tried to grab a bottle from an aid station then dump it into your aero drink on the fly? That can get messy. Profile's HC Mount w/KA1 Cage allows you to attach a bottle cage in between your extensions so you can grab a bottle and have it within easy reach. It's an easy way to add more water carrying capacity to your bike.
$24.99 - $26.00
Keep your water cold 4x longer! We re-engineered our legendary Podium Ice to be the ultimate insulated cycling bottle, even when temps rise into triple-digits. With unmatched aerogel insulation technology, high flow rate, and easy cleanability, the Podium Ice stands second to none. And like our entire Podium collection, it's 100% free of BPA, BPS and BPF and features improved cage fit and the squeezability that CamelBak is known for. - Aerogel Insulation: Keeps water cold 4x longer than other bottles - Optimized Cage Fit: Engineered to securely fit in a variety of bottle cages - Easy Squeeze: Get more fluid with less effort - High Flow, Self-Sealing Cap: Maximizes flow rate while eliminating splatters and spills - 100% free of BPA, BPS and BPF: Ride clean, drink clean - Easy-to-Clean Interface: All parts can separate for thorough cleaning - Positive Lock out: For leak-proof transport - Trutaste Polypropylene with Hydroguard: Taste your water and nothing else, time after time.
With Profile's Aerodrink System you can stay in your aero position and stay hydrated. This durable, injection-molded 32-ounce bottle includes an extended straw for easy access, and its mesh plug is great for on-the-go refills. The Aerodrink also slips easily into Profile's Airstryke and Century aero bars (sold separately).
The Ultimate Drink Holder! ABC – ANY BOTTLE CAGE! Fits almost any bottle, cup, or container 2 1/4" to 4 3/4". Turn knob to tighten and turn to loosen. Crank it down so drink won't come out or set to desired interference fit for easy in or easy out. - Handlebar, frame, and seat post adapters available.
Side loading for smaller frames This side-loading cage lets you easily access bottles from small spaces while you ride. It's suitable for road and MTB use and is the ideal choice for smaller frames, full suspension bikes, and when using a frame bag. - Lightweight and durable composite construction - Side-loading design allows for easy bottle access on compact frames - Water bottle access from the left side when mounted on the downtube - Water bottle access from the right side when mounted on the seat tube - Suitable for road and mountain use - Use with the Right Side Load Cage for seat tube and downtube access on the same side of frame
Side loading for smaller frames This side-loading cage lets you easily access bottles from small spaces while you ride. It's suitable for road and MTB use and is the ideal choice for smaller frames, full suspension bikes, and when using a frame bag. - Lightweight and durable composite construction - Side-loading design allows for easy bottle access on compact frames - Water bottle access from the right side when mounted on the downtube - Water bottle access from the left side when mounted on the seat tube - Suitable for road and mountain use - Use with the Left Side Load Cage for seat tube and downtube access on the same side of frame
$19.99 - $24.99
No matter what kind of fuel you sip to help you power your pedals, Electra's Linear Cup Holder will bring it along for the ride. It features a solid handlebar mount that's a breeze to install and classy, laser-etched anodized aluminum construction that firmly holds your beverage so you can use both hands to steer.
- Self-adjusting elastomer to improve bottle retention - Made with high-impact composite material
Stay aero and stay hydrated with Profile's Aqualite! Featuring an easy-to-refill, no-splash cap, this durable, injection-molded 22-ounce bottle includes an extended straw for easy access. And, the Aqualite fits both wide and narrow-mounted aerobars easily with Profile's Aerodrink bracket (sold separately).
Small parts can be hard to keep up with. If you've lost pieces of the mounting hardware for your Speed Concept Water Bottle Cage, don't sweat it. You'll find all the replacement parts in this handy hardware kit. • Aluminum
The Sport is basically a modified Dave-O shape, made of nylon-reinforced plastic. Sports are as tough as nails and hold bottles well in all conditions and any application. They have two sets of mounting holes to allow the best fit possible. We consider this cage as good as anything we make, it's just made out of different stuff. - Weight: 47 grams
Choose your flavor The Elite Water Bottle cage provides the same secure bottle hold as the carbon Pro Cage in a more economical, composite material. This cage is ideal for road and mountain bikes, and it's available in a wide variety of colors to suit your bike. - Super strong yet lightweight construction - Secure bottle retention suitable for road and mountain use - Available in a wide variety of colors - Weighs only 38g
Page 1 of 3 Next page