Filter By:
- Lubes/Cleaners (58)
- Tools (110)
- Workstands (4)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Tools/Maintenance

$874.99
- Well thought out, extremely durable tool pallets organize and hold your tools in place. Pockets are designed with the size of our tools in mind. It also features a few extra pockets leaving you room to personalize your kit.
- 48 pieces of our tools that are a perfect fit for a portable set, shop, home or team mechanics

$469.95
Park Tool's Deluxe Home Mechanic Repair Stand is a heavy-duty folding stand with your choice of shop quality clamps. Perfect for heavier duty home use or portable shop use, the PCS-4 features a rock-solid, four-point leg system that folds together for storage, steel powder-coated tubing, and a composite horizontal tube.
• PCS-4-1 uses the 100-5C Adjustable Linkage Clamp.
• Clamp rotates 360º and is adjustable in height up to 67” (170cm)
• Adjusts quickly from 55" to 72"
• Approximate weight 26 lbs (11.8 kg)
NOTE: The maximum weight holding capacity of the PCS-4 is 45 kg (100 lb.). However, this assumes the weight is centered over the legs.

$12.75 - $320.95
We worked diligently on our next generation of bicycle chain lubricant for several years. Our Micro Resistant Complex Compounds (MRCC) had been in development for over 10 years. Originally developed for our motorsports lubrication, MRCC technology creates a lighter viscosity while maintaining high protection, reducing friction, and increase in creating much higher film strength than common, traditional technology.
PRO X LITE Bicycle Chain Lubricant
Like our Regular chain lube, cyclists who tested or raced using PRO X Lite, report it to perform better then any other lube they have ever used. Even those riders that use our Standard Lite and Original chain lubes. A bold statement even for us to claim, but comes from years of technology, formulation, and testing.
PRO X Lite brings the aspect of polymerization and MRCC oils that by design migrate for complete wetting of the surfaces.
Benefits:
- MRCC technology creates an extremely low friction bond.
- A dry lubricant that does not attract dust and dirt.
- Watts. Very little is used to move your bike parts.
- 10 time high lubricity the Teflon. Ceramic lubes? Catchy hype.
- Waterproof which will not wash off.
- Drive train stays clean, last longer, runs silent.
- Extremely durable, outlasts all other chain lubes in any condition.
- Tamely scented.
- Applied sparingly for the best results and increased value.
- Can be shipped around the world via air freight and ground.
PRO X LITE is the lighter version to our PRO X REGULAR chain lubricant. PRO X LITE is ideal for a road bike, wet or dry, and extreme dry off-road trail conditions or over cyclist you are prone to over applying.
PRO X LITE can be used on all cables, pivots points and seals. Safe on plastic, rubber, and all seal materials. The product is designed to not harm your components. Our products are engineered to perform with minimal "carbon footprint" by not washing off in water, to use sparingly, lasts longer between applications, your drive train lasts longer. Very good performer in extreme cold conditions.

$289.99
"A full-featured bicycle workstand designed and built for the home mechanic. The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment. Features 18"" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing.
The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability. The PCS-10.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.
The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach. Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion.
The PCS-10.3 is the perfect way to upgrade your home shop—a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair.
NOTE: The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs.?
- Cam-actuated micro-adjustable clamp fits 7/8"" to 3"" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts
- Narrow clamping jaws (2.7""/70 mm) fit into tight areas or on short seat posts
- Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage
- Durable, textured powder coat finish
- Integrated height-adjustable parts tray
- Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately)
- Maximum weight capacity*: 80 lbs. (36 kg)
- Height adjustable from 39"" to 57"" (990 mm–1450 mm) using convenient quick-release lever
- Base when open forms a triangle of 36"" x 36"" x 48"" (920 mm x 920 mm x 1210 mm)
- Folds down to 45"" x 14.5"" (1140 mm x 370 mm)
- Weight: 16 lbs. (7.2 kg)"

$8.70 - $282.45
Our Classic ORIGINAL chain lube is a liquid plastic and through polymerization forms long-lasting plating on all chain surfaces.
- “Riding in” forms an extremely low-friction plating.
- Plating bonds to chain; can’t be washed off!
- Components stay cleaner, last longer, and run quieter.
- Extremely durable, outlasts all other chain lubes!
- Environmentally sensitive and saves money.
- To be applied sparingly unlike many other lubes.
Classic Lite and Original Bicycle Chain Lube (BCL) differ only in their concentration. Original BCL is more concentrated for exceptional durability under the most challenging conditions.
The two formulas are compatible and may be used interchangeably.
We recommend the Original Bicycle Chain Lube for mountain bikes, cyclo-cross, and more extreme conditions. You can confidently use Dumonde Tech’s Bicycle Chain Lube on all cables, pivots points, and seals. Safe on plastic, rubber, all seal materials. The product is designed to not harm your components. Eco-friendly and environmentally sensitive, our products are engineered to perform with minimal “carbon footprint” by not washing off in water, to use sparingly, lasts longer between applications, and your drive train lasts longer. Very good performer in the extreme cold conditions..

$249.99
The Spider Team repair stand is developed in collaboration with pro team mechanics who work with it intensively on a daily basis. Thanks to their tips, you too can adjust, assemble, and repair in an efficient manner. The Spider Team is also suitable for different shaped bottom brackets, such as time-trial bikes, bicycles with sensors for power measurement and bicycles with electronic gearing (Shimano Di2 or Campagnolo EPS).
- Extra parts included for a variety of forks
- Due to its triangular profiles dirt is less likely to adhere to the surface
- Anodized tubes are lightweight and resistant to detergents
- Compact and easy to carry when folded
- The integrated tool tray can tilt and rotate 360-degrees
- Weight: 9 lbs
- Maximum load: 33 lbs
- Not compatible with Lefty forks

$7.99 - $169.99
Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts.
- Ideal for all conditions - wet, dry, road and trail
- High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

$156.95
World-famous Park Tool quality wrapped up in a great set of metric combination wrenches. The MWR-SET includes 6mm to 17mm wrenches with a 12-point two-way ratcheting box end. Forged from chrome vanadium steel, chrome-plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip. Strong, comfortable, and beautiful!
- Includes 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, and 17mm wrenches

$105.00
Product details
- A professional-grade tool developed in partnership with Knipex and made to last
- 7.5"/190mm length provides high leverage with minimum effort
- Made from heavy-duty steel and additional induction hardening for tough, continuous use
- Made in Germany
- Features an integrated class-leading crimper for cable end caps and housing ferrules

$97.95
Never be left looking for an errant wrench when you have Park's Metric Wrench Set. It includes 12 high quality Park metric wrenches from 6 to 17mm in diameter, featuring both box and open ends. They are all forged from chrome vanadium steel, then chrome plated for durability and dipped in Park Tool blue vinyl for outstanding comfort and ease of use.

$89.99
The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead.
- 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut
- Magnets keep all bits in place
- Ball detent swivel head helps access hard-to-reach places
- Handle doubles as breaker bar for extra torque when head is bent
- 8mm hex bit tested to over 40 Nm torque
- Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains)
- Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)

$49.00 - $77.00
- Essential mechanic tools to properly service and maintain all RockShox products
- Clamps the shock body for easy maintenance

$11.00 - $59.99
Royal Blood mineral oil is a specially formulated, low viscosity hydraulic fluid that ensures consistent performance of Magura brakes.
- Doesn't absorb water
- Lubricates entire braking system

$54.99
Park's Freewheel Remover Wrench provides superior leverage for freewheel removal and installation. Its head slides over Park freewheel removers and features a locking knob for a secure fit.

$52.99
A compact, efficient way to hold flat fixing essentials so you can get back on the bike quickly.
The Pro Flat Pack has everything you need to fix a flat and get back on the bike quickly in an aero, easy to grab package. This all-in-one kit provides essential items needed to fix a flat tire with additional pockets for money and ID, plus extra soft, padded materials to ensure you won't be bothered by the poke of a tool while it's stashed in your back pocket.
- Tight fitting, stretch neoprene material zips open for easy access
- All the items you need to fix a flat tire
- Includes Air Rush Elite, CO2‚ inflator, two 16g CO2‚ cartridges, and a padded bag
- Reusable hand insulation sleeve, vulcanizing patch kit
- Room in the bag for ID, money, keys, and more

$49.99
Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.

$49.99
Periodic hydraulic remote bleeds are necessary to maintain consistent performance. RockShox's Bleed Kit has everything you need to keep your Reverb and X-Loc remotes functioning at their best.

$49.99
Oil Level Adjuster (for checking and adjusting oil level) -Reverb/Motion Control Dampers /Turnkey Dampers

$49.95
Accurately gauge the straightness of disc brake rotors while the wheel is mounted in a TS-2.2 or TS-2 Professional Wheel Truing Stand (each sold separately). Park Tool's Rotor Truing Gauge features an infinitely adjustable, finely threaded indicator gauge. It works with any diameter brake rotor.

$49.95
Fix tubeless tire punctures and broken chains. This multi-tool has a chain tool on one end and a tire plug built into the handle, with inner storage for tubeless tire plugs. The full multi-tool was designed for use with an EnCase System Storage Sleeve, which fits inside bar ends of your handlebars. Ride with this multi-tool in a storage sleeve or in a tool wrap for easy repairs while riding.
- Compatible with all bicycle chains, including 12-speed
- Inserter tool and bacon strips plug holes in tubeless tires
- Five bacon strip tire plugs included; refills available
- Hardened steel chain pin driver for lifetime durability
- Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (sold separately) or carry in a jersey pocket
- Chain tool driver requires 4mm hex (available on EnCase System Hex Bit Wrench)
- Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)

$9.99 - $47.20
ProGold ProLink is designed to shed dirt, mud, and abrasives, and reduce tacky build-up in all climates.
- Smoother shifting, quieter drive train
- Repels moisture and reduces oxidation and corrosion
- Disperses water and resists wash-off
- Will not build up or get tacky
- Works well in all climates
- Longer chain and sprocket life
- Long-lasting
- Can be used as a dry lubricant
- Environmentally friendly
- Available in: 4 fluid-ounce drip, 8 fluid-ounce aerosol, 16 fluid-ounce pump, and 32 fluid-ounce.

$44.99
- Lightweight and low profile
- Forged center-pivot stainless steel bits
- Durable stainless steel fastening hardware
- Hex 2/3/4/5/6/8mm
- T10/T25, Phillips
- Lightweight AL chain breaker tool
- 102g

$44.99
- Alloy body with chrome plated tools
- Hex 2 / 2.5 / 3 / 4 / 5 / 6 / 8mm
- PH2 screwdriver
- Torx 10 / 26
- Chaintool
- Spoke wrench 3.6 / 3.75 / 4.0 / 4.4mm
- Chain holder
- Tire lever
- Brake pad spreader

$44.95
This ultralight hex and bottom bracket wrench has a 1-inch hex at one end and an external BB cup spline at the other end. The 1-inch hex end features magnets that quickly couple with Wolf Tooth's steel hex insert tools.
- 1-inch hex drive at one end and 16-notch 44mm bottom bracket tool (or centerlock rotor tool) at the other end
- Includes the wrench only. Steel inserts are not included but can be purchased separately
- 1-inch hex drive interface compatible. Magnets inset allow quick coupling and decoupling of steel inserts

$43.95
A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings.
The Chain Gang includes:
- CM-5.3 Cyclone Chain Scrubber
- GSC-1 GearClean Brush
- 8 oz. bottle of Bio ChainBrite
The CG-2.4 works on nearly any bike, including multi-speed, single-speed, and e-bikes.

$42.95
An economical option for safely and accurately tightening fasteners to proper torque specifications. With a simple gauge readout, the TW-1.2 is intuitive and easy to use, and applies up to 14 Nm of torque to any fastener or component with left or right-handed threads. Perfect for low-torque applications such as stem bolts, levers, and carbon fiber components. 3/8" drive for compatibility with all Park Tool sockets, bits, and crow feet.
- 0 to 14 Newton meter (0 to 140 inch-pound) range
- 3/8" drive
- Reads and registers torque values for both left hand and right hand threading
- Length: 11.5" (292 mm)

$39.99
$51.99
23% Off
A compact yet capable tool with an array of hex, torx, spoke, screwdriver, and chain tools.
Make road- or trail-side adjustments and fixes with confidence using 1 of 15 integrated tools packaged in the slim and easy-to-carry design of Bontrager Pro Multi-Tool. A vast array of hex, torx, spoke tools and screwdrivers will have you back on your back in no time —and it all packs down small in a magnetic case for easy carrying in a pocket or bag.
Product details
- Slim magnetic case doubles as handle for all tools, including chain tool
- 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, #2 Phillips, #1 Flat, T25 and 0, 1, 2, 3 spoke
- Lightweight, durable design stows nearly anywhere
- Chain tool compatible with 8, 9, 10, 11, 12-speed drivetrains
- Integrated bottle opener for post ride refreshments

$10.99 - $39.99
For extreme conditions, you need an extreme lube. That's when you grab Finish Line's Wet Lubricant. It's ultra water-resistant and long-lasting thanks to its special formulation of synthetic oils, special polymers and anti-wear additives. This lube delivers superb drivetrain lubrication and protection and it's the ultimate choice for muddy off-road rides, all-day epics and long, rainy commutes.
- Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives
- Will require more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection
- Upon application, wipe excess off chain to minimize attraction of dirt and grime
- Finish Line's Wet Lubricant delivers the ultimate in lubricity and protection. It requires a little more attention to drivetrain cleanliness compared to Finish Line's Dry or Wax lubes.

$39.99
Professional-grade, versatile bike chain multi-tool engineered for a variety of road or trailside repairs. The Multi Chain Pliers are constructed from machined aluminum and feature an integrated quick-link tool, chain breaker, valve core tool, bottle opener, rotor aligner, and magnetic holders for up to two spare quick links. Its slim design allows for maximum portability and it's engineered for long-lasting use. It also features an anodized finish and a hardened steel chain breaker pin. Mountain bikers, road cyclists, and gravel grinders will all find its versatility highly useful, whether in the workshop or out on the road or trail.
- Weight: 61g
- Dimensions: 120 x 38 x 10mm
Page 1 of 6
Next page