Pumps/Inflation

Perfection in a bicycle pump. A Project One-inspired pump that makes inflating tires on your dream bike a pleasure. An air of sophistication This exclusive Project One branded floor pump was built in collaboration with Silca to bring you the best inflation device on the market to take care of your Project One bike. It features a timeless purpleheart wood handle and luxurious Swiss pressure gauge that make other bike accessories pale in comparison. A custom finish helps put this floor pump on equal footing to your custom ride, with unsurpassed looks and reliable performance to last a lifetime. PRODUCT DETAILS - Hand-tuned purpleheart wood handle - Swiss gauge with accuracy to within 1% - Stainless steel finish with custom Project One Owners Club details - Easily and cleanly store the chuck with the magnetic dock - Weighted zinc baseplate - Stainless steel braided hose

A floor pump and a tubeless setup tool in one. Set to Charge for a pressurized chamber that makes at-home and on-the-fly setup of tubeless ready (TLR) tires a breeze. Tubeless setup made simple TLR Flash Charger is the single-pump solution for daily use and at-home tubeless setup. It functions just like a standard floor pump when set to 'Inflate'. Switching it to 'Charge' gives the ability to pressurize a chamber and 'flash release' the stored air in order to seat tubeless tires without a bulky air compressor. Plus, it has a broad, back-lit digital gauge that delivers accurate pressure readings all the way to 160 PSI. Product details - Dual-chamber design with Inflate setting allows for efficient use as a traditional floor pump - Set to Charge for a pressurized chamber that inflates tubeless ready (TLR) tires without a compressor - Digital gauge provides easy-to-read accuracy up to 160 PSI (recommended maximum) - Compatible with both Presta and Schrader valves - Included inflation accessories conveniently stored in handle

The easy button for inflation Air Rush is a compact mini electric pump that makes flat fixes a breeze. It easily tops up tires pre-ride or fully reinflates two tires from flat, so you can get back to your ride sweat-free. Its bright digital display shows target pressure, current pressure, battery charge, and pressure units, while three simple buttons make operation easy. Plus, a single charge replaces up to four 16g CO2 cartridges. Product details: - Battery charges in less than an hour via a USB-C port - Presta, Shrader and needle valve adapters are included - Displays pressure in PSI, bar, and kPa - Inflation pressure range: 2 – 120 PSI - Net weight: 3.8oz. (108g) - Size: 3.15 x 1.77 x 1.26in (80 x 45 x 32mm) - Replaces up to four 16g CO2 cartridges with one single charge

Get accurate and precise results every time with RockShox's High-Pressure Digital Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large digital BAR/PSI readout. It runs off one CR2032 battery (included) and the hose swivels 360-degrees to fit anywhere.

A digital shock pump with an accurate, easy-to-read gauge and a thread-on design that minimizes bleed-off so you can easily adjust your shock pressure. Digitally dialed Dialed suspension is crucial to a great ride. Upgrading to the Bontrager Digital Shock Pump will make it easy to dial-in front and rear suspension with confidence. It features a large, easy-to-read digital gauge that displays PSI/bar/kg/cm2, a bleed valve for fine-tuning pressure, and a thread-on design that quickly attaches for a reliable, secure connection. Product details: - Easy-to-read gauge accurately reads up to 300 PSI (20 bar) - Threaded design for a secure connection that reduces bleed down - Bleed valve reduces pressure in small increments - Suitable for use with front forks and rear shocks - Displays PSI, bar, or kg/cm2 - Replaceable CR2023 battery Features: Easy-to-read digital gauge A broad, back-lit digital gauge provides accurate pressure readings to a maximum of 300psi (30 bar) Minimize connection bleed off Fast and secure connection minimizes bleed off when connecting and disconnecting Bleed valve to fine tune suspension The bleed valve allows you to release small amounts of pressure to fine tune your suspension to exactly where you want it Specs: - Pump type: Suspension - Valve: Schrader - Gauge type: Digital - Max pressure: 300psi - Frame mounted: No - Dimensions: 292mm (11.5") - Hose length: 25.4cm (10")

A versatile floor pump that allows for easy transition between high volume and high pressure settings. A pump for road and MTB The Dual Charger Pump is versatile floor pump with multiple pressure settings that let you easily inflate high-pressure road tires and larger volume hybrid and MTB tires. A quick flip of the switch moves between settings, making it perfect for riders who own both a road and mountain bike. Product details - Steel construction and replaceable internals provide long-term durability - Auto-select head instantly fits both Presta and Schrader valves - Large, stable base minimizes tipping - Easy to read 4-inch base-mounted gauge - Base-mounted switch allows for easy transition between high volume and high pressure settings - High volume setting allows for quick inflation - High pressure setting allows for easy inflation as PSI increases - Max pressure 160 psi (11bar)

The Digital Shock Drive features incredibly compact and lightweight aluminum construction with a cleverly integrated hose that threads into the handle when not in use. Highlighting the Digital Shock Drive is the ultra low-profile digital gauge that’s built into the pump’s aluminum body. This innovative design keeps the pump extremely compact, yet still provides a highly accurate measurement of air pressure. It provides up to 350 psi (24 bar) and features a zero-loss chuck design, which unthreads from the shock after the valve pin seals itself. This is the ultimate shock pump to throw in a pack and use for trailside adjustments.

The EDC Pump offers a unique storage solution integrated into a high volume pump. It is designed to integrate with the EDC Tool System, CO2 canister or your favorite stash. Crafted from aluminum with a durable textured machined finish. PUMP VOLUME A mini pump might look appealing, but with typical volumes of 30-60cc it will take hundreds of strokes to inflate a new tube and has absolutely no chance of re-inflating a tubeless setup. When you get a flat, you want to fix it as fast as possible as riding time is precious. At 100cc and at 160g our high volume pump has the highest volume to weight ratio on the market. FAST-ON HEAD Firmly push the pump head onto the Presta valve until it bottoms out, then pump. With our fast-on head the valve stem is securely supported so there's no chance of bending, breaking or unseating the valve and no chance of unscrewing your valve core when you remove the pump.- Crafted from 6061-T6 aluminum with a durable textured machined finish. - 2 Sizes: High Volume 100cc & Compact 70cc - 1-1/4 diameter x 10 length for 100c (160g) - 1-1/4 diameter x 7 length for 70cc (135g) - 100cc Pump holds EDC Tool & a 20g CO2 or EDC Tool & the Storage Capsule - 70cc Pump holds EDC Tool (no Storage Capsule) or a 20g CO2 - Fast-On Head (Presta Only) - No threads or locking levers - Integrated CO2 Inflator - Fully Sealed, Weatherproofed Internals - Includes Bottle Cage Mount - Material: 6061-T6 - Weight: 135g - 70cc, 160g - 100cc (without EDC tool system)

The Topeak JoeBlow III continues the tradition of setting the benchmark for floor pump durability and performance while ushering in upgrades with an enlarged 3-inch chronograph-inspired gauge and hammer-style TwinHead DX pump head. A durable steel barrel and base as well as an ergonomic padded handle make inflating tires a breeze. - Presta / Schrader / Dunlop-compatible - Max 160psi / 11bar - Volume per stroke: 317.5cc - 3.7lbs / 1.68kg - Ball and bladder needles included

Grip and rip with Lezyne's Shock Drive portable shock pump. With a full CNC-machined aluminum body, tough composite gauge, and palm-sized ergonomic handle, you can pump reps with Schwarzenegger pep till your shock's content. The zero-loss chuck ensures accurate ride pressures up to 400 psi, and its light weight and durability make it great for trail or shop use.

The PFP-10 is a reliable floor pump that's equally at home in the garage, workshop or trailhead, with a long hose, extra-large foot pads and a giant easy-to-read gauge. The locking universal head automatically adjusts to fit both Presta and Schrader valve stems. - Compatible with Presta and Schrader valves - Maximum pressure: 160 PSI (11 bar) - One-year warranty — see Park Tool Limited Warranty

A compact, efficient way to hold flat fixing essentials so you can get back on the bike quickly. The Pro Flat Pack has everything you need to fix a flat and get back on the bike quickly in an aero, easy to grab package. This all-in-one kit provides essential items needed to fix a flat tire with additional pockets for money and ID, plus extra soft, padded materials to ensure you won't be bothered by the poke of a tool while it's stashed in your back pocket. - Tight fitting, stretch neoprene material zips open for easy access - All the items you need to fix a flat tire - Includes Air Rush Elite, CO2‚ inflator, two 16g CO2‚ cartridges, and a padded bag - Reusable hand insulation sleeve, vulcanizing patch kit - Room in the bag for ID, money, keys, and more

For the perfect pressure A shock pump with an accurate, easy-to-read gauge and a thread-on design that minimizes bleed off so you can easily adjust your shock pressure. The perfect pressure takes precision. The Bontrager Shock Pump features a large, easy-to-read gauge for accurate readings, a bleed valve for pinpoint accuracy, and a thread-on design that quickly attaches to front and rear suspension shocks for a reliable, secure connection. - Easy-to-read gauge that is accurate to 400 PSI - Threaded design for a secure connection that reduces bleed down - Bleed valve reduces pressure in small increments - Suitable for use with front forks and rear shocks

Innovative 2-in-1 cycling CO2 dispenser and tubeless tire repair kit simultaneously inflates and seals tubeless tires. Machined aluminum construction is both lightweight and highly durable. Hardened steel reamer scours hole, inserts plug, and inflates tire for an efficient and rapid repair. CNC-machined twist knob manually controls release of CO2 gas. Aluminum canister holds the five included tire plugs and safely stores the reamer when not in use. High-quality tire plugs aggressively seal holes that are too large to be sealed by sealant alone (hole size varies from tire to tire). Sleek, compact design fits in a pocket or straps to your bike. Note: Sealing performance may vary based on puncture size, tire size, and tire pressure. - Compact tubeless tire repair kit. - Machined aluminum storage tube doubles as a handle. - Combined tire reamer and insertion tool. - Includes five tire plugs. - Includes 2 x 20g CO2 Cartridge and Velcro Strap.

Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.

Keep it classy Extend the hidden hose on the Air Support HP Pro pump, and thread it onto your Presta valve for secure inflation of your road tires. Designed with a smaller volume chamber for higher-pressure tires, this premium pump allows you to quickly inflate tires up to 120 psi. Stow it in your jersey pocket, or use the included bracket to mount it under your bottle cage. Product details - Premium-quality with smaller volume chamber for higher pressure tires - Inflate to 120 psi (8.25 bar) with little effort - Extendable, hidden hose reduces stress at valve when pumping at higher pressures - Threaded head securely locks onto Presta valves - Compact design fits snugly inside jersey pocket - Mounting bracket fits easily under bottle cage

A compact mini pump that easily packs in your jersey pocket or bag and quickly inflates larger volume tires. Packable and powerful The Air Support HV Pro easily packs into a jersey pocket, bag, or pack and provides easy, accessible inflation for larger volume tires. An extendable air hose helps eliminate stress at the valve stem and a larger chamber allows for quick inflation up to 60 PSI. This refined mini-pump features a polished silver finish and comes with an on-bike mount. Product details - High volume air chamber for larger volume tires - Inflate to 60 psi (4.15 bar) with little effort - Extendable, hidden hose reduces stress at valve - Mounting bracket fits easily under bottle cage - Designed to work with Presta valves

A reliable floor pump featuring a durable steel barrel, an auto-select head, and a stable base. Fresh air for your tires Nothing slows a cyclist down like an inappropriate amount of tire inflation. Loaded with features like a stable, tip-resistant base, a durable steel barrel, and an auto-select head, the Charger stands ready whenever your tires need a little boost. Product details - Steel construction and replaceable internals provide long-term durability - Auto-select head instantly fits both Presta and Schrader valves - Large, stable base minimizes tipping - Easy-to-read 3-inch base-mounted gauge - Max pressure 160 psi (11bar)

Bontrager's Air Support HV is a life-saver when you flat out on the trail. A large volume chamber makes it a breeze to use on fat mountain bike tires. It has an easy-to-use thumblock, an auto-selecting head that fits Presta and Schrader valves, plus a fold-out T handle and a dual action for fast inflation. The Air Support HV is compact and light and it comes with a mount to carry it on your frame.

Product details - Intended for low and mid-volume pavement tires - Inflates tires to 80 psi (5.5bar) with little effort - Auto-select head locks securely onto Presta or Schrader valves - Fold-out lever securely locks pump head to valve - Mounting bracket fits easily under bottle cage - Easy to read pressure gauge puts information within view

The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.

Compact and super efficient high pressure bicycle hand pump featuring a knurled barrel for superior grip while pumping. Its proven engineered design with an overlapping handle is constructed from machined aluminum, providing superior durability, minimal weight and all of the style. The integrated ABS Flex Hose is presta and shrader valve compatible, and greatly improves pumping action and ergonomics. This mini pump is completely rebuildable and made with the best materials available. With up to 120 PSI (8.3 BAR) of pumping power, the Grip Drive HP is excellent for all high-pressure bicycle tire applications. - 230 mm, 105g - 120 psi, 8.3 bar. - Grip Textured CNC machined aluminum construction with compact overlapping handle. - Presta and Schrader valve compatible ABS Flex Hose. - Includes Composite Matrix frame mount

Compact and super-efficient high-volume bike hand pump featuring a knurled barrel for superior grip while pumping. Its proven engineered design with an overlapping handle is constructed from machined aluminum, with superior durability, minimal weight, and all of the style. The integrated ABS Flex Hose is Presta and Schrader valve compatible and greatly improves pumping action and ergonomics. This mini pump is completely rebuildable and made with the best materials available. With up to 90 PSI (6.2 BAR) of pumping power, the Grip Drive HV is excellent for all-mountain bikes and gravel bikes. Includes a lightweight Composite Matrix frame mount. - Max pressure: 90 PSI | 6.2 BAR - Small: 186mm | 119g - Medium: 231mm | 134g

Bontrager's Air Support Road hand pump is a highly durable pump with a small volume chamber for quick inflation of higher-pressure tires up to 115 psi. The fold-out lever locks the pump head securely to the valve for consistent airflow into the tire. Use the included bracket to easily mount it under your bottle cage. Available in two lengths: Long for more air per stroke, or Short for an easy fit into a jersey pocket.

The Pocket Drive is an amazingly compact and lightweight bicycle hand pump featuring plenty of pumping efficiency. It's constructed from durable CNC machined aluminum and has a handle that's lightly knurled for slip-resistant operation. With its overlapping handle and integrated ABS Flex Hose, the Pocket Drive offers performance unmatched for its size. The pump is Presta and Schrader valve compatible, and it's completely rebuildable for continued use at a high level. - 140mm, 79g - 160 psi, 11 bar - CNC machined aluminum construction with compact overlapping handle - Presta and Schrader valve compatible ABS Flex Hose - Includes Composite Matrix frame mount

The Pocket Drive HV is an incredibly compact and lightweight high-volume bike hand pump featuring impressive pumping efficiency for large tire applications, e.g. gravel or mountain bikes. It's constructed from durable CNC-machined aluminum and has a knurled barrel for slip-resistant operation. 90 PSI max.

Lezyne's convenient Twin Kit includes their Twin Speed Drive CO2 inflator, two CO2 cartridges, a couple tire levers and a Velcro strap to keep it all together. Its aluminum head is compatible with both Presta and Schrader valves, and uses a simple twisting action for easy inflation. And, it accepts all threaded CO2 cartridges.

Show flats no fear with Bontrager's Air Support pump. Built for the lower-volume tires on your commuter, cruiser or town bike, but can handle road and mountain tires, the Air Support is great for topping off your pressures or fixing that unfortunate flat. The auto-select head uses a fold-out lever to lock securely to Schrader or Presta valves for quick and easy inflation up to 80 psi.

Lezyne's easy-to-use Alloy Drive CO2 is super compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with 16g threaded cartridges. - CNC machined aluminum dispenser with brass internals - CNC control knob twists for easy and controlled inflation - Twin Slip Chuck head presses on to Presta and Schrader valves - Neoprene sleeve insulates hand from cold during discharge - Compatible with threaded CO2 cartridges - Comes with one 16g cartridge

Lezyne's easy-to-use Alloy Drive CO2 is super-compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with all threaded cartridges. - CNC-machined aluminum dispenser with brass internals - CNC control knob twists for easy and controlled inflation - Twin Slip Chuck head presses on to Presta and Schrader valves - Neoprene sleeve insulates hand from cold during discharge - Compatible with threaded CO2 cartridges (sold separately)